Innovec Controls - Innovec Fuel Gauge FG4 Price Guide: $330

Innovec Fuel Gauge FG4

 The instrument is rangeable in engineering units for milliamp and voltage inputs. A 12 to 24VDC at 30mA loop supply is available for the direct connection of 2 wire transmitters.

• Band gap reference
• Differential input
• Low cost - High performance
• 12 to 24VDC isolated supply
• 4 digit high brightness  Blue OLED display of 14mm digit height
• One set point relays with form C contacts and a panel mount enclosure of 48x96mm
• 24VDC loop supply for loop powered sensors and transmitters
• Emc compliant
• Intended as an upgrade on Mercedes Benz buses

The FG4 Fuel Gauge is an advanced instrument that has been designed and manufactured to stringent specifications which accepts 4-20mA and 1-5VDC analogue process signals.

The FG4 provides one (1) set point relays with 99% dead band. All the set point relays have changeover contacts and will switch one amp at 240VAC resistive. Screw terminal electrical connection by two part plug connectors allows simple connection and disconnection.

Specifications

Input Details

The instrument has a bipolar differential input. To realise the accuracy a temperature compensated band gap reference is used in the radiometric measurement system.

• Full scale range of 1-5VDC and 4-20mA are acceptable.
• NMRR greater than 100db
• CMRR greater than 86db

Display

• A 3.5 digit high contrast light emitting diode (LED) of 14mm digit height with a wide viewing angle and a reading rate of 2.5 per second. The digits have a viewing distance of 5 metres.

Decimal Points

• Three (3) position user selectable by push on jumper.

Relay Outputs

• Two (2) switch point relays are provided with form C contacts rated at 240VAC one (1) ampere resistive.

Instrument Power supply

• 12 to 40VDC.

Transducer Power Supply

• A 24VDC at 30mA transducer power supply is incorporated in the instrument.

Environmental Parameters

• 0-70 degrees Celsius.
• 0-90% RH Non- condensing.

Weight

• FG4: 300grams.

Mounting Details

• Panel mounting plastic enclosure of case dimensions 96mm wide by 48mm high by 161mm deep with a panel cut out of 91mm wide by 43mm high.

Ordering Information

• Model/input signal/display units/power supply
• Sample number: FG4/1-5V DC/0-250/24VDC
• All units shipped factory calibrated to 0-250

 

Read more...

To contact Innovec Controls about Innovec Controls Innovec Fuel Gauge FG4 use Get a quote.

 The instrument is rangeable in engineering units for milliamp and voltage inputs. A 12 to 24VDC at 30mA loop supply is available for the direct connection of 2 wire transmitters.

• Band gap reference
• Differential input
• Low cost - High performance
• 12 to 24VDC isolated supply
• 4 digit high brightness  Blue OLED display of 14mm digit height
• One set point relays with form C contacts and a panel mount enclosure of 48x96mm
• 24VDC loop supply for loop powered sensors and transmitters
• Emc compliant
• Intended as an upgrade on Mercedes Benz buses

The FG4 Fuel Gauge is an advanced instrument that has been designed and manufactured to stringent specifications which accepts 4-20mA and 1-5VDC analogue process signals.

The FG4 provides one (1) set point relays with 99% dead band. All the set point relays have changeover contacts and will switch one amp at 240VAC resistive. Screw terminal electrical connection by two part plug connectors allows simple connection and disconnection.

Specifications

Input Details

The instrument has a bipolar differential input. To realise the accuracy a temperature compensated band gap reference is used in the radiometric measurement system.

• Full scale range of 1-5VDC and 4-20mA are acceptable.
• NMRR greater than 100db
• CMRR greater than 86db

Display

• A 3.5 digit high contrast light emitting diode (LED) of 14mm digit height with a wide viewing angle and a reading rate of 2.5 per second. The digits have a viewing distance of 5 metres.

Decimal Points

• Three (3) position user selectable by push on jumper.

Relay Outputs

• Two (2) switch point relays are provided with form C contacts rated at 240VAC one (1) ampere resistive.

Instrument Power supply

• 12 to 40VDC.

Transducer Power Supply

• A 24VDC at 30mA transducer power supply is incorporated in the instrument.

Environmental Parameters

• 0-70 degrees Celsius.
• 0-90% RH Non- condensing.

Weight

• FG4: 300grams.

Mounting Details

• Panel mounting plastic enclosure of case dimensions 96mm wide by 48mm high by 161mm deep with a panel cut out of 91mm wide by 43mm high.

Ordering Information

• Model/input signal/display units/power supply
• Sample number: FG4/1-5V DC/0-250/24VDC
• All units shipped factory calibrated to 0-250

 

Read less...

To contact Innovec Controls about Innovec Controls Innovec Fuel Gauge FG4 use Get a quote.

FG4 data sheet OLED(0.06MB)