IFM Efector Flow Sensor | SA5000

All Products > Test & Measurement > Flow Sensor

IFM Efector - Flow Sensor | SA5000 Price Guide: $682

Supplier: ifm efector
IFM Efector - Flow Sensor | SA5000
Flow Sensor | SA5000
IFM Efector - Flow Sensor | SA5000
Flow Sensor | SA5000
IFM Efector - Flow Sensor | SA5000
Flow Sensor | SA5000
IFM Efector - Flow Sensor | SA5000
Flow Sensor | SA5000
IFM Efector - Flow Sensor | SA5000

Measurement of flow and temperature at the same time - optimised for water, oils and air

Description
Documents
In Stock

Features: 

  • Measurement of flow and temperature at the same time
  • Optimised for water, oils and air
  • Red/green display for clear identification of the acceptable range
  • With switching output, analogue signal and IO-Link
  • The process connection can be rotated for optimum alignment

 

Product characteristics
Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
Process connection threaded connection M18 x 1,5 internal thread
 
Application
Special feature Gold-plated contacts
Media water; glycol solutions; air; oils
Note on media
low-viscosity oils with viscosity: ≤ 40 mm²/s (40 °C)
high-viscosity oils with viscosity: > 40 mm²/s (40 °C)
Medium temperature [°C] -20...90
Pressure rating [bar] 100
Pressure rating [Mpa] 10
MAWP (for applications according to CRN) [bar] 100
 
Electrical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 100
Protection class III
Reverse polarity protection yes
Power-on delay time [s] 10
 
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
 
Outputs
Total number of outputs 2
Output signal switching signal; analogue signal; frequency signal; IO-Link; (configurable)
Electrical design PNP/NPN
Number of digital outputs 2
Output function normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V] 2.5
Permanent current rating of switching output DC [mA] 250
Number of analogue outputs 1
Analogue current output [mA] 4...20; (scalable)
Max. load [Ω] 350
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
Frequency of the output [Hz] 0...1000
 
Measuring/setting range
Probe length L [mm] 45
Operating mode relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended)
Note on factory setting
Operating mode: relative
 
Temperature monitoring
Measuring range [°C] -20...90
Resolution [°C] 0.2
 
Liquid media - absolute operating mode
Setting range [m/s] 0.04...3
Greatest sensitivity [m/s] 0.04...3
 
Liquid media - relative operating mode
Setting range [m/s] 0.04...6
Greatest sensitivity [m/s] 0.04...3
 
Gases - operating mode "absolute"
Setting range [m/s] 0...100
Greatest sensitivity [m/s] 30...100
 
Gases - operating mode "relative"
Setting range [m/s] 0...200
Greatest sensitivity [m/s] 30...100
 
Accuracy / deviations
Temperature drift [cm/s x 1/K] 0,003 m/s x 1/K (< 20 °C; > 70 °C)
Temperature gradient [K/min] 100
 
Absolute operating mode
Repeatability 0,05 m/s; (water; flow velocity: 0,05...3 m/s)
 
Relative operating mode
Accuracy ± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions:; water: 20...70 °C; inlet length: 1.5 m; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.)
Repeatability 0,05 m/s; (water; flow velocity: 0,05...3 m/s)
 
Temperature monitoring
Temperature drift ± 0,005 K/°C
Accuracy [K] ± 0,3 / ± 1; (water; flow velocity: 0,3...3 m/s / air; flow velocity: > 10 m/s)
 
Response times
Response time [s] 0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)
 
Temperature monitoring
Dynamic response T05 / T09 [s] 1,5 (T09); (water; flow velocity: 0,3...3 m/s)
 
Software / programming
Parameter setting options hysteresis / window; normally open / normally closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour
 
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO mode yes
Required master port type A
Process data analogue 2
Process data binary 2
Min. process cycle time [ms] 3
Supported DeviceIDs
Type of operation DeviceID
Factory setting / ModE = (REL) 533
ModE = (LIQU) 540
ModE = (GAS) 547
 
Operating conditions
Ambient temperature [°C] -40...80
Storage temperature [°C] -40...100
Protection IP 65; IP 67
 
Tests / approvals
EMC
DIN EN 60947-5-9  
Shock resistance
DIN EN 60068-2-27 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6 20 g (10...2000 Hz)
UL approval
UL Approval no. I003
 
Mechanical data
Weight [g] 314
Materials stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PBT-GF20; PBT-GF30
Materials (wetted parts) stainless steel (1.4404 / 316L); Gasket: FKM
Process connection threaded connection M18 x 1,5 internal thread
 
Displays / operating elements
Display
Display unit 6 x LED, green (%, m/s, l/min, m³/h, °C, 10³)
switching status 2 x LED, yellow
measured values alphanumeric display, red/green 4-digit
 
Remarks
Remarks
MW = measured value
MEW = Final value of the measuring range
Pack quantity 1 pcs.
 
Electrical connection
Connection Connector: 1 x M12; Contacts: gold-plated
 

Read more...

To contact ifm efector about IFM Efector Flow Sensor | SA5000 use Get a quote.

Features: 

  • Measurement of flow and temperature at the same time
  • Optimised for water, oils and air
  • Red/green display for clear identification of the acceptable range
  • With switching output, analogue signal and IO-Link
  • The process connection can be rotated for optimum alignment

 

Product characteristics
Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
Process connection threaded connection M18 x 1,5 internal thread
 
Application
Special feature Gold-plated contacts
Media water; glycol solutions; air; oils
Note on media
low-viscosity oils with viscosity: ≤ 40 mm²/s (40 °C)
high-viscosity oils with viscosity: > 40 mm²/s (40 °C)
Medium temperature [°C] -20...90
Pressure rating [bar] 100
Pressure rating [Mpa] 10
MAWP (for applications according to CRN) [bar] 100
 
Electrical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 100
Protection class III
Reverse polarity protection yes
Power-on delay time [s] 10
 
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
 
Outputs
Total number of outputs 2
Output signal switching signal; analogue signal; frequency signal; IO-Link; (configurable)
Electrical design PNP/NPN
Number of digital outputs 2
Output function normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V] 2.5
Permanent current rating of switching output DC [mA] 250
Number of analogue outputs 1
Analogue current output [mA] 4...20; (scalable)
Max. load [Ω] 350
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
Frequency of the output [Hz] 0...1000
 
Measuring/setting range
Probe length L [mm] 45
Operating mode relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended)
Note on factory setting
Operating mode: relative
 
Temperature monitoring
Measuring range [°C] -20...90
Resolution [°C] 0.2
 
Liquid media - absolute operating mode
Setting range [m/s] 0.04...3
Greatest sensitivity [m/s] 0.04...3
 
Liquid media - relative operating mode
Setting range [m/s] 0.04...6
Greatest sensitivity [m/s] 0.04...3
 
Gases - operating mode "absolute"
Setting range [m/s] 0...100
Greatest sensitivity [m/s] 30...100
 
Gases - operating mode "relative"
Setting range [m/s] 0...200
Greatest sensitivity [m/s] 30...100
 
Accuracy / deviations
Temperature drift [cm/s x 1/K] 0,003 m/s x 1/K (< 20 °C; > 70 °C)
Temperature gradient [K/min] 100
 
Absolute operating mode
Repeatability 0,05 m/s; (water; flow velocity: 0,05...3 m/s)
 
Relative operating mode
Accuracy ± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions:; water: 20...70 °C; inlet length: 1.5 m; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.)
Repeatability 0,05 m/s; (water; flow velocity: 0,05...3 m/s)
 
Temperature monitoring
Temperature drift ± 0,005 K/°C
Accuracy [K] ± 0,3 / ± 1; (water; flow velocity: 0,3...3 m/s / air; flow velocity: > 10 m/s)
 
Response times
Response time [s] 0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)
 
Temperature monitoring
Dynamic response T05 / T09 [s] 1,5 (T09); (water; flow velocity: 0,3...3 m/s)
 
Software / programming
Parameter setting options hysteresis / window; normally open / normally closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour
 
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO mode yes
Required master port type A
Process data analogue 2
Process data binary 2
Min. process cycle time [ms] 3
Supported DeviceIDs
Type of operation DeviceID
Factory setting / ModE = (REL) 533
ModE = (LIQU) 540
ModE = (GAS) 547
 
Operating conditions
Ambient temperature [°C] -40...80
Storage temperature [°C] -40...100
Protection IP 65; IP 67
 
Tests / approvals
EMC
DIN EN 60947-5-9  
Shock resistance
DIN EN 60068-2-27 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6 20 g (10...2000 Hz)
UL approval
UL Approval no. I003
 
Mechanical data
Weight [g] 314
Materials stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PBT-GF20; PBT-GF30
Materials (wetted parts) stainless steel (1.4404 / 316L); Gasket: FKM
Process connection threaded connection M18 x 1,5 internal thread
 
Displays / operating elements
Display
Display unit 6 x LED, green (%, m/s, l/min, m³/h, °C, 10³)
switching status 2 x LED, yellow
measured values alphanumeric display, red/green 4-digit
 
Remarks
Remarks
MW = measured value
MEW = Final value of the measuring range
Pack quantity 1 pcs.
 
Electrical connection
Connection Connector: 1 x M12; Contacts: gold-plated
 

Read less...

To contact ifm efector about IFM Efector Flow Sensor | SA5000 use Get a quote.

Get a quote
Let ifm efector provide you with a quote
Supplier
Get a quote
Supplier: ifm efector
Location: Mulgrave, VIC
Is this your product? Manage products / company details |
Report this product
More from this supplier
See all 14 items
Vision Sensor - 3D | O3M171

Vision Sensor - 3D | O3M171

 Vibration Sensor | VVB001

Vibration Sensor | VVB001

 Compact Speed Sensor for Hazardous Areas | DI602A

Compact Speed Sensor for Hazardous Areas | DI602A

 Self-Monitoring Temperature Sensor | TCC501

Self-Monitoring Temperature Sensor | TCC501

 Flow Sensor | SA5000

Flow Sensor | SA5000

 Compressed Air Meter | SDG207

Compressed Air Meter | SDG207

 Radar Level Sensor | LW2720

Radar Level Sensor | LW2720

 Pressure Sensor with Display | PN7071

Pressure Sensor with Display | PN7071

 Ultrasonic Diffuse Reflection Sensor | UIT507

Ultrasonic Diffuse Reflection Sensor | UIT507

 Position Sensor for Rising Stem Valves | IX5010

Position Sensor for Rising Stem Valves | IX5010

 AS-Interface Inductive Sensor | IM5118

AS-Interface Inductive Sensor | IM5118

 Capacitive High-temperature Sensor | KN5121

Capacitive High-temperature Sensor | KN5121

 IO-Link Position Sensors | OPD101

IO-Link Position Sensors | OPD101

 Inductive High-temperature Sensor | I95045

Inductive High-temperature Sensor | I95045
You might also like these
Flow Sensor - Single-Piece Flow Detector FD2000

Flow Sensor - Single-Piece Flow Detector FD2000

 TurboFlow Flow Sensors | FT-110 & FT-210

TurboFlow Flow Sensors | FT-110 & FT-210

 Rotorflow | Gems - RFS - Flow Sensor

Rotorflow | Gems - RFS - Flow Sensor

 Full Bore EMF for Magnetic Flow Sensors | Transmitter Type SE56

Full Bore EMF for Magnetic Flow Sensors | Transmitter Type SE56

 FHA Mass Flow Sensors for Gases

FHA Mass Flow Sensors for Gases

 FBO Mass Flow Sensors for Gases

FBO Mass Flow Sensors for Gases

 Fuel Flow Sensor | Corrsys Datron

Fuel Flow Sensor | Corrsys Datron

 Flow Sensors

Flow Sensors

 Direct Automation | Sensors | Flow Sensor -FL1001

Direct Automation | Sensors | Flow Sensor -FL1001

 Airflow Sensors | Zephyr HAF Series

Airflow Sensors | Zephyr HAF Series

 Airflow Sensors | AWM3000 Series

Airflow Sensors | AWM3000 Series

 Airflow Sensors | AWM5000 Series

Airflow Sensors | AWM5000 Series

 Thermal Mass Flow Sensors | S 401/421

Thermal Mass Flow Sensors | S 401/421

 Heavy Duty Industry Flow Sensor | S 450/452

Heavy Duty Industry Flow Sensor | S 450/452

 Flow Sensors | Flow Sensors Type A+

Flow Sensors | Flow Sensors Type A+

 Flow Sensors Flow Sensors Type H

Flow Sensors Flow Sensors Type H

 Fluid flow sensor ,5 ranges,0.05-10 l/min

Fluid flow sensor ,5 ranges,0.05-10 l/min

 Airflow Sensor | Accutron Pro Series

Airflow Sensor | Accutron Pro Series
Contact ifm efector
Flow Sensor in Melbourne
Flow Sensor in Adelaide
Flow Sensor in Sydney
Flow Sensor in Darwin
Flow Sensor in Brisbane
Flow Sensor in Perth
Are you a Flow Sensor supplier?
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales
learn more