Holemaking - Reaming - Bifix

Holemaking - Reaming - Bifix™

The range covers diameters from 5,90 - 60,50 mm. A hole tolerance of IT6 and a surface finish of Ra 0,25 can be achieved thanks to a design incorporating three Cermet guide pads and an accurate adjusting system.

The original clamping design ensures an efficient and stable blade clamping. Bifix also features internal through coolant channels.

High quality

• Good guiding system using three Cermet guiding pads
• Adjustable reamer achieving high precision (IT5 / IT6)
• Extreme surface finish using double lead angle 15/3 degrees

Versatile

• Indexable blades
• Optimised geometries and blade grades for different work piece materials
• Double lead angle 30/3 degrees - suitable for most materials
• Two coolant designs for through holes (pushing chips forward) and blind holes (pushing chips backwards)

Production security

• Strong clamping system with two clamps
• Optimal chip evacuation
• Short lead angle with end cutting for blind bores when bottom cut is required

Productivity

• Cermet grade for optimisation in steel
• Cost effective
• Indexable blades with two cutting edges per blade
• Lowest carbide cost

Read more...

To contact Seco Tools Australia about Holemaking - Reaming - Bifix use Get a quote.

The range covers diameters from 5,90 - 60,50 mm. A hole tolerance of IT6 and a surface finish of Ra 0,25 can be achieved thanks to a design incorporating three Cermet guide pads and an accurate adjusting system.

The original clamping design ensures an efficient and stable blade clamping. Bifix also features internal through coolant channels.

High quality

• Good guiding system using three Cermet guiding pads
• Adjustable reamer achieving high precision (IT5 / IT6)
• Extreme surface finish using double lead angle 15/3 degrees

Versatile

• Indexable blades
• Optimised geometries and blade grades for different work piece materials
• Double lead angle 30/3 degrees - suitable for most materials
• Two coolant designs for through holes (pushing chips forward) and blind holes (pushing chips backwards)

Production security

• Strong clamping system with two clamps
• Optimal chip evacuation
• Short lead angle with end cutting for blind bores when bottom cut is required

Productivity

• Cermet grade for optimisation in steel
• Cost effective
• Indexable blades with two cutting edges per blade
• Lowest carbide cost

Read less...

To contact Seco Tools Australia about Holemaking - Reaming - Bifix use Get a quote.