Gunnebo - Safety Barrier | EX750 CAT2 Boom Gate

Safety Barrier | EX750 CAT2 Boom Gate

Features of this product

• ATEX / IECEx certified
• Certified for use up to Zone 1&2
• Category 2G
• Gas Group IIB
• Robust Construction
• Independently certified
• Produced by certified IECEx manufacturer
• 100% Duty cycling
• Low maintenance

Specifications of this product

• Physical Dimensions: Barrier Cabinet – 1130mm H x 500mm W x 305mm D
• Basic Power Requirements: 230v, 1ph, 6amp, 50HZ (Other voltages are available on request)
• Control Voltage: S.E.L.V 24v
• ATEX certified protection level: II 2G IIB c T3
• IECEx certified protection level: Ex h IIB T3 Gb
• Speed of operation: 4.2 seconds to raise/lower cycle
• Approx weight: 130kg
• Paint finish: INVER S.P.A. 40496 NP ESD Rosso 3001 (red), thickness 80 microns (anti-static paint)
• Boom profile – Rectangular extruded aluminium 76 x 38mm white powder coated with red fascal striping (black and yellow option available) Max length 5m. Booms are mounted on the right hand (as standard unless specified)
• Barrier arm: The barrier arm is constructed from 76 x 38mm aluminium, white powder coated with reflective red striping. Booms are mounted on the right side of the barrier as viewed from the back of the cabinet.
• Power fail operation: Manual hand wind
• IP & Electrical protection level: The barrier comes with an IP66, ATEX / IECEx Ex d explosion proof certified enclosure to enclose the control system

Read more...

To contact Gunnebo Australia about Gunnebo Safety Barrier | EX750 CAT2 Boom Gate use Get a quote.

Features of this product

• ATEX / IECEx certified
• Certified for use up to Zone 1&2
• Category 2G
• Gas Group IIB
• Robust Construction
• Independently certified
• Produced by certified IECEx manufacturer
• 100% Duty cycling
• Low maintenance

Specifications of this product

• Physical Dimensions: Barrier Cabinet – 1130mm H x 500mm W x 305mm D
• Basic Power Requirements: 230v, 1ph, 6amp, 50HZ (Other voltages are available on request)
• Control Voltage: S.E.L.V 24v
• ATEX certified protection level: II 2G IIB c T3
• IECEx certified protection level: Ex h IIB T3 Gb
• Speed of operation: 4.2 seconds to raise/lower cycle
• Approx weight: 130kg
• Paint finish: INVER S.P.A. 40496 NP ESD Rosso 3001 (red), thickness 80 microns (anti-static paint)
• Boom profile – Rectangular extruded aluminium 76 x 38mm white powder coated with red fascal striping (black and yellow option available) Max length 5m. Booms are mounted on the right hand (as standard unless specified)
• Barrier arm: The barrier arm is constructed from 76 x 38mm aluminium, white powder coated with reflective red striping. Booms are mounted on the right side of the barrier as viewed from the back of the cabinet.
• Power fail operation: Manual hand wind
• IP & Electrical protection level: The barrier comes with an IP66, ATEX / IECEx Ex d explosion proof certified enclosure to enclose the control system

Read less...

To contact Gunnebo Australia about Gunnebo Safety Barrier | EX750 CAT2 Boom Gate use Get a quote.