EXAIR - Cabinet Coolers - Stop electronic control downtime Get latest price

Non-Hazardous Purge Cabinet Cooler Systems are ideal for dirty areas where contaminants might pass through small holes or conduits.

Hazardous Location Cabinet Cooler Systems are for use with classified enclosure purge and pressurisation systems.

Type 316 stainless steel Dual Cabinet Cooler Systems are suitable for food service, pharmaceutical, harsh & corrosive environments.

A NEMA 4 (IP66) Cabinet Cooler System cools a panel while keeping the inside dry.

High Temperature Cabinet Cooler Systems suitable for ambients of 52°C up to 93°C are available.

Side Mount Kits offer convenient mounting to the side of an electrical enclosure.

Stabilize Temperature and Humidity

1669 Recent Views In Stock

The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout. NEMA 12, 4, and 4X (IP54 and IP66) models that match the NEMA rating of the enclosure are available in many cooling capacities for large and small control panels.

Vortex tubes incorporated in EXAIR Cabinet Coolers are constructed of stainless steel. The wear, corrosion and oxidation resistance of stainless steel assures long life and maintenance free operation. All EXAIR Cabinet Coolers are UL Listed and CE compliant.

EXAIR Cabinet Coolers are available with or without thermostat control. The continuous operation coolers are recommended when constant cooling and a constant positive purge are desirable. The thermostatically controlled systems save air by activating the cooler only when internal temperatures approach critical levels. The adjustable thermostat is factory set at 35°C. Thermostatic systems are recommended where heat load fluctuates and continual purge is not required.

EXAIR manufactures special NEMA 4, 4X and 12 Cabinet Coolers suited to specific environmental requirements:

High Temperature Cabinet Coolers for ambients of 52° to 93°C are available. Internal components can withstand high temperatures (like those near furnaces, ovens, etc.).

HazLoc Cabinet Coolers have been tested by UL and passed their stringent requirements for use upon classified purged and pressurised electrical enclosures within Class I Div 1, Groups A, B, C and D; Class II Div 1, Groups E, F and G – and Class III environments. The cooling capacity of up to 5,600 Btu/hr. (1411 Kcal/hr.) is ideal for electrical enclosures with problematic overheating. They are CE compliant and available for NEMA 4 and 4X enclosures.

Non-Hazardous Purge Cabinet Cooler Systems are ideal for dirty areas where contaminants might normally pass through small holes or conduits. Under normal conditions, the NHP Cabinet Cooler Systems provide a slight positive pressure in the enclosure by passing 1 SCFM of air through the cooler. When the thermostat detects high temperature, it energises the solenoid valve to pass full line pressure to the Cabinet Cooler, giving it full cooling capability.

Dual Cabinet Cooler Systems up to 5600 Btu/hr. (1411 Kcal/hr.) capacity are available. They are ideal for applications where the heat load is extremely high.

Type 316 Stainless Steel NEMA 4X Cabinet Coolers are suitable for food service, pharmaceutical, harsh and corrosive environments, and other applications where 316SS is preferred. Capacities up to 5600 Btu/hr. (1411 Kcal/hr.) are available.

Applications for Cabinet Coolers:

• Programmable controllers
• Line control cabinets
• Motor control centres
• Relay panels
• NC/CNC systems
• Modular control centres
• CCTV cameras
• Computer cabinets
• Laser housings
• Electronic scales
• Food service equipment

Advantages of Cabinet Coolers:

• Low cost
• Compact
• Cooling capacities to 5600 Btu/hr. (1411 Kcal/hr.)
• Quiet
• Install in minutes
• Maintain NEMA 12, 4 and 4X integrity (IP54 and IP66)
• Stabilise enclosure temperature and humidity
• No CFCs
• No moving parts - maintenance free
• Mount in standard electrical knockout
• Stop nuisance tripping
• Stop heat damage
• Eliminate fans and filters
• Eliminate lost production
• Stop circuit drift
• Stop dirt contamination
• Provide wash-down protection

Read more...

To contact Compressed Air Australia about EXAIR Cabinet Coolers - Stop electronic control downtime use Get a quote.

The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout. NEMA 12, 4, and 4X (IP54 and IP66) models that match the NEMA rating of the enclosure are available in many cooling capacities for large and small control panels.

Vortex tubes incorporated in EXAIR Cabinet Coolers are constructed of stainless steel. The wear, corrosion and oxidation resistance of stainless steel assures long life and maintenance free operation. All EXAIR Cabinet Coolers are UL Listed and CE compliant.

EXAIR Cabinet Coolers are available with or without thermostat control. The continuous operation coolers are recommended when constant cooling and a constant positive purge are desirable. The thermostatically controlled systems save air by activating the cooler only when internal temperatures approach critical levels. The adjustable thermostat is factory set at 35°C. Thermostatic systems are recommended where heat load fluctuates and continual purge is not required.

EXAIR manufactures special NEMA 4, 4X and 12 Cabinet Coolers suited to specific environmental requirements:

High Temperature Cabinet Coolers for ambients of 52° to 93°C are available. Internal components can withstand high temperatures (like those near furnaces, ovens, etc.).

HazLoc Cabinet Coolers have been tested by UL and passed their stringent requirements for use upon classified purged and pressurised electrical enclosures within Class I Div 1, Groups A, B, C and D; Class II Div 1, Groups E, F and G – and Class III environments. The cooling capacity of up to 5,600 Btu/hr. (1411 Kcal/hr.) is ideal for electrical enclosures with problematic overheating. They are CE compliant and available for NEMA 4 and 4X enclosures.

Non-Hazardous Purge Cabinet Cooler Systems are ideal for dirty areas where contaminants might normally pass through small holes or conduits. Under normal conditions, the NHP Cabinet Cooler Systems provide a slight positive pressure in the enclosure by passing 1 SCFM of air through the cooler. When the thermostat detects high temperature, it energises the solenoid valve to pass full line pressure to the Cabinet Cooler, giving it full cooling capability.

Dual Cabinet Cooler Systems up to 5600 Btu/hr. (1411 Kcal/hr.) capacity are available. They are ideal for applications where the heat load is extremely high.

Type 316 Stainless Steel NEMA 4X Cabinet Coolers are suitable for food service, pharmaceutical, harsh and corrosive environments, and other applications where 316SS is preferred. Capacities up to 5600 Btu/hr. (1411 Kcal/hr.) are available.

Applications for Cabinet Coolers:

• Programmable controllers
• Line control cabinets
• Motor control centres
• Relay panels
• NC/CNC systems
• Modular control centres
• CCTV cameras
• Computer cabinets
• Laser housings
• Electronic scales
• Food service equipment

Advantages of Cabinet Coolers:

• Low cost
• Compact
• Cooling capacities to 5600 Btu/hr. (1411 Kcal/hr.)
• Quiet
• Install in minutes
• Maintain NEMA 12, 4 and 4X integrity (IP54 and IP66)
• Stabilise enclosure temperature and humidity
• No CFCs
• No moving parts - maintenance free
• Mount in standard electrical knockout
• Stop nuisance tripping
• Stop heat damage
• Eliminate fans and filters
• Eliminate lost production
• Stop circuit drift
• Stop dirt contamination
• Provide wash-down protection

Read less...

To contact Compressed Air Australia about EXAIR Cabinet Coolers - Stop electronic control downtime use Get a quote.

EXAIR Cabinet Cooler Systems(8.07MB)