Decorative Panel & Wall | MetecnoKasset Get latest price

Decorative Panel & Wall | MetecnoKasset

Decorative Panel & Wall | MetecnoKasset

Decorative Panel & Wall | MetecnoKasset

Decorative Panel & Wall | MetecnoKasset

In Stock

MetecnoKasset was the perfect choice for the Yorkshire Brewery (pictured above). With limited access for cranes and scaffolding, standard curtain wall and insulated panel systems were difficult to install. Because MetecnoKasset can be installed from inside the building, it allowed the developers to use insulated panel products without the added costs and logistics.

 

MetecnoKasset is available in a range of COLORBOND® colours, a palette of choice to create an inspiring interior and exterior finish.

• A complete system
• Tested & Passed all criteria for AS 5113 – External wall and Fire Spread requirements
• Manufactured in Australia
• New level of fire protection
• New level of thermal properties
• Prefab sections delivered directly to site
• Slot into place and secure
• Build, clad and insulate all in one

 

PIR Full Curtain or Window Wall System

• Modular unit for seamless window/ wall junctions
• Durable  & versatile Architectural System
• Extensive colours and finishes

Low & High-Rise (wind rated up to 250m)

• Testing & engineering in Australia by Ian Bennie & Associates & Inhabit Group
• Registered Design & Regulation 1507: Certificate of Compliance
• Full test rig accreditation to Australian standards AS/NZS 4284:2008 (Structural SLS, Air Infiltration, Water Penetration, Structural ULS.)

Fast & Economical Alternative to Tilt Panel

• Lightweight & easy to install (up to 50% faster) 
• No need for perimeter scaffolding. Installed over handrails or behind screens.
• 2 floors p.w. cycle at Yorkshire Brewery Apartments

 

Module Specifications

 

Module Thickness	115 mm
Module Height	Made to measure up to 3800mm in height
Module Width	Made to measure incorporating 1100mm wide panels
Mass	22.1 kg/m2
Acoustic Properties	Rw 25-37*
Thermal Performance	‘R’ Value: 4.91 W/m2K; ‘U’ Value: 0.20 m2K/W
Module composition	Modified FM approved PIR (Fire –retardant Polyisocyanurate) panel with prefinished profiled steel skins and internal skin lined with 6mm fibre cement.
Frame Material	Anodized or Powder coated extruded Aluminium with extruded weather seals
Colours	Choice of any Colorbond® standard, metallic or custom colour for external skin, frame and trims.
Finishes	Panel surface can be supplied in Plain, Fineline, Satinline or Ribbed profiles.

*depending on system

 

Test and Engineering

Façade Fire Evaluation testing to NATA accreditation requirements by Exova Warringtonfire Aus.	Testing to AS 5113 according to their tendency to limit the spread of fire across their surface and between neighbouring buildings and integrates international standard test methods where practicable.
Building performance testing in Australia to NATA accreditation requirements by Ian Bennie & Associates	Structural SLS, Air Infiltration, Water Penetration and Structural ULS test procedures and performance requirements in accordance with standard AS/NZS 4284:2008, Testing of Building Facades. Optional tests: including BMU   restraint, seismic loading and seal degradation.
Engineering certification to the provisions of the section B1 of the Building Code of Australia and the Australian Standards by Inhabit Australasia	AS/NZS 1170.0:2002- Structural design actions – Part 0: General Principles   AS/NZS 1170.1:2002, Structural design actions – Part 1: Permanent, imposed & other actions AS/NZS 1170.2:2002, Structural design actions – Part 2: Wind actions AS/NZS 1664.1:1997, Aluminium Structures AS4100:1998, Steel Structures
Codemark Certification	Coming Soon

Read more...

To contact Cladding Systems about Decorative Panel & Wall | MetecnoKasset use Get a quote.

MetecnoKasset was the perfect choice for the Yorkshire Brewery (pictured above). With limited access for cranes and scaffolding, standard curtain wall and insulated panel systems were difficult to install. Because MetecnoKasset can be installed from inside the building, it allowed the developers to use insulated panel products without the added costs and logistics.

 

MetecnoKasset is available in a range of COLORBOND® colours, a palette of choice to create an inspiring interior and exterior finish.

• A complete system
• Tested & Passed all criteria for AS 5113 – External wall and Fire Spread requirements
• Manufactured in Australia
• New level of fire protection
• New level of thermal properties
• Prefab sections delivered directly to site
• Slot into place and secure
• Build, clad and insulate all in one

 

PIR Full Curtain or Window Wall System

• Modular unit for seamless window/ wall junctions
• Durable  & versatile Architectural System
• Extensive colours and finishes

Low & High-Rise (wind rated up to 250m)

• Testing & engineering in Australia by Ian Bennie & Associates & Inhabit Group
• Registered Design & Regulation 1507: Certificate of Compliance
• Full test rig accreditation to Australian standards AS/NZS 4284:2008 (Structural SLS, Air Infiltration, Water Penetration, Structural ULS.)

Fast & Economical Alternative to Tilt Panel

• Lightweight & easy to install (up to 50% faster) 
• No need for perimeter scaffolding. Installed over handrails or behind screens.
• 2 floors p.w. cycle at Yorkshire Brewery Apartments

 

Module Specifications

 

Module Thickness	115 mm
Module Height	Made to measure up to 3800mm in height
Module Width	Made to measure incorporating 1100mm wide panels
Mass	22.1 kg/m2
Acoustic Properties	Rw 25-37*
Thermal Performance	‘R’ Value: 4.91 W/m2K; ‘U’ Value: 0.20 m2K/W
Module composition	Modified FM approved PIR (Fire –retardant Polyisocyanurate) panel with prefinished profiled steel skins and internal skin lined with 6mm fibre cement.
Frame Material	Anodized or Powder coated extruded Aluminium with extruded weather seals
Colours	Choice of any Colorbond® standard, metallic or custom colour for external skin, frame and trims.
Finishes	Panel surface can be supplied in Plain, Fineline, Satinline or Ribbed profiles.

*depending on system

 

Test and Engineering

Façade Fire Evaluation testing to NATA accreditation requirements by Exova Warringtonfire Aus.	Testing to AS 5113 according to their tendency to limit the spread of fire across their surface and between neighbouring buildings and integrates international standard test methods where practicable.
Building performance testing in Australia to NATA accreditation requirements by Ian Bennie & Associates	Structural SLS, Air Infiltration, Water Penetration and Structural ULS test procedures and performance requirements in accordance with standard AS/NZS 4284:2008, Testing of Building Facades. Optional tests: including BMU   restraint, seismic loading and seal degradation.
Engineering certification to the provisions of the section B1 of the Building Code of Australia and the Australian Standards by Inhabit Australasia	AS/NZS 1170.0:2002- Structural design actions – Part 0: General Principles   AS/NZS 1170.1:2002, Structural design actions – Part 1: Permanent, imposed & other actions AS/NZS 1170.2:2002, Structural design actions – Part 2: Wind actions AS/NZS 1664.1:1997, Aluminium Structures AS4100:1998, Steel Structures
Codemark Certification	Coming Soon

Read less...

To contact Cladding Systems about Decorative Panel & Wall | MetecnoKasset use Get a quote.