Classic Lift Australia 2- Post Hoist- ...

Classic Lift Australia - 2- Post Hoist- 4.0Ton | BP4000

Supplier: Classic Lift Australia

2- Post Hoist- 4.0Ton | BP4000

This 4.0 Ton- BP4000 – Base Plate Our 4tonne baseplate chain-drive cylinder lift and lifting Height 2169mm is one of the best Baseplate on the market.

In Stock

Our new versatile and ergonomic arm design allows the user of the hoist to either drive on or reverse on without the need to swap the arms around.

CLASSIC introduces a revolutionary double lock system installed in both columns. This new lock system incorporates two locking mechanisms for added safety. The double lock system is automatically activated as the lift is raised. There is no need for the operator to go to both columns and manually unlock both column locks. All lifting and lowering operations are controlled from one column post. Double safety locks built into each column operated by one release level make the CLASSIC, BP4000 floor plate lift the safest and easiest to operate floor plate lift in the industry. Two locks…one release…available only in Classic Lifts

Product Features:

9,000 Lb. Capacity
Dual hydraulic chain-drive cylinders manufactured on ANSI standard
3/8″ aircraft quality cables are used for synchronization
Self-lubricating UHMW Polyethylene sliders and bronze bushings
Single-point safety release allows the technician to release both column locks from one column easily
Automatic arm restraints
Adjustable double screw lift pads are included with the Classic BP4000
Warranty: 1 Year Warranty on electrical and hydraulics including Hoist Rams / 5-year structural warranty.
Registered with Worksafe

Product Specifications:

Model Classic BP4000	Floorplate Chain-drived
Lifting Capacity	4.0T (9,000 lbs)
Lifting Time	49 Seconds
Lifting Height	1940-2169mm
Overall Height	2841mm
Overall Width	3460mm
Drive-Thru Clearance	2560mm
Width Between Columns	2850mm
Minimum Pad Height	90mm
Gross Weight	706Kg
Motor	2.0/3.0HP

To contact Classic Lift Australia about Classic Lift Australia 2- Post Hoist- 4.0Ton | BP4000 use Get a quote.

Our new versatile and ergonomic arm design allows the user of the hoist to either drive on or reverse on without the need to swap the arms around.

Product Features:

9,000 Lb. Capacity
Dual hydraulic chain-drive cylinders manufactured on ANSI standard
3/8″ aircraft quality cables are used for synchronization
Self-lubricating UHMW Polyethylene sliders and bronze bushings
Single-point safety release allows the technician to release both column locks from one column easily
Automatic arm restraints
Adjustable double screw lift pads are included with the Classic BP4000
Warranty: 1 Year Warranty on electrical and hydraulics including Hoist Rams / 5-year structural warranty.
Registered with Worksafe

Product Specifications:

Model Classic BP4000	Floorplate Chain-drived
Lifting Capacity	4.0T (9,000 lbs)
Lifting Time	49 Seconds
Lifting Height	1940-2169mm
Overall Height	2841mm
Overall Width	3460mm
Drive-Thru Clearance	2560mm
Width Between Columns	2850mm
Minimum Pad Height	90mm
Gross Weight	706Kg
Motor	2.0/3.0HP