Floor Bunding Suppliers in Perth

Floor bunding is a raised barrier or wall that is installed around the perimeter of a floor area to contain spills, leaks, and other hazardous materials. It is designed to prevent the spread of spills and protect the environment, people, and property from contamination. Floor bunding is required by law in many industries, including chemical, pharmaceutical, and food processing, where hazardous materials are handled and stored. It is also recommended for any facility that deals with liquids or chemicals to prevent accidents and ensure safety.

Floor bunding can be made from a variety of materials, including:

• Polyurethane: This is a popular material for floor bunding as it is durable, flexible, and resistant to chemicals and oils.
• PVC: PVC floor bunding is lightweight, easy to install, and resistant to chemicals and oils.
• Rubber: Rubber floor bunding is ideal for heavy-duty applications as it is tough, durable, and resistant to impact and abrasion.
• Concrete: Concrete floor bunding is a permanent solution that is ideal for areas with heavy traffic or where spillages are frequent.
• Steel: Steel floor bunding is strong and durable, making it ideal for areas with heavy machinery or equipment.
• Aluminum: Aluminum floor bunding is lightweight, easy to install, and resistant to corrosion and rust.

The choice of material will depend on the specific requirements of the application, such as the type of chemicals or oils being stored, the level of traffic in the area, and the budget available.

When choosing the right size and height for your floor bunding, consider the type and volume of the liquids you will be containing, the size and weight of the vehicles or equipment that will be passing over the bunding, and any regulatory requirements. The height of the bunding should be sufficient to contain any spills or leaks, but not so high that it becomes a tripping hazard or impedes access. The width of the bunding should be wide enough to contain any spills or leaks, but not so wide that it takes up too much space or becomes difficult to navigate around. It is important to consult with a professional to ensure that your floor bunding meets all necessary safety and regulatory requirements.

Floor bunding can be installed on most types of flooring, including concrete, epoxy, tile, and vinyl. However, the installation process may vary depending on the type of flooring and the specific requirements of the bunding system. It is important to consult with a professional installer to ensure that the floor bunding is installed correctly and effectively.

Floor bunding is a type of barrier that is installed around the perimeter of a floor to contain spills and prevent them from spreading. Here are the steps to install floor bunding:

• Clean the floor: Before installing the bunding, make sure the floor is clean and free of debris.
• Measure and mark the area: Measure the perimeter of the floor and mark the area where the bunding will be installed.
• Prepare the surface: If the floor is uneven or has cracks, use a leveling compound to smooth it out.
• Apply adhesive: Apply a strong adhesive to the bottom of the bunding and press it firmly onto the floor.
• Secure the bunding: Use screws or bolts to secure the bunding to the floor. Make sure the screws or bolts are spaced evenly and are tight.
• Seal the joints: Use a sealant to seal the joints between the sections of bunding to prevent leaks.
• Allow to dry: Allow the adhesive and sealant to dry completely before using the area.

By following these steps, you can install floor bunding to contain spills and protect your floors.

However, the capacity of a floor bunding depends on various factors such as the size of the bunding, the material used, and the type of liquid being stored. It is recommended to consult the manufacturer or supplier for specific information on the maximum capacity of a floor bunding.

Yes, there are regulations and standards for floor bunding in Australia. The Australian Standard AS 1940-2017 sets out the requirements for the design, construction, and installation of bunds for the storage of flammable and combustible liquids. The Work Health and Safety Regulations 2011 also require employers to ensure that bunds are provided where necessary to contain spills and leaks of hazardous substances. Additionally, state and territory environmental protection authorities may have their own regulations and guidelines for bunding.

Floor bunding should be regularly inspected and cleaned to ensure it remains effective in containing spills and leaks. Here are some tips for maintaining and cleaning your floor bunding:

• Regularly inspect the bunding for any signs of damage or wear and tear. Replace any damaged sections as soon as possible.
• Clean the bunding regularly using a mild detergent and water. Avoid using harsh chemicals that could damage the material.
• Rinse the bunding thoroughly with clean water and allow it to dry completely before using it again.
• If the bunding has been exposed to hazardous materials, follow the appropriate decontamination procedures before cleaning it.
• Store the bunding in a dry, cool place when not in use to prevent damage from sunlight or moisture.

By following these tips, you can ensure that your floor bunding remains in good condition and continues to provide effective spill containment.

However, in general, the ability to customize the color or design of floor bunding may depend on the manufacturer or supplier. Some may offer a range of colors and designs to choose from, while others may only offer standard options. It is best to check with the manufacturer or supplier for more information on customization options.

However, floor bunding costs can vary depending on the size and material of the bunding. It is best to research and compare prices from different suppliers in Australia to find the best deal. Some potential suppliers include industrial supply stores, construction supply companies, and online retailers.