Fall Arrester & Fall Limiter Suppliers in Perth

A fall arrester, also known as a fall arrest system, is a safety device designed to prevent a person from falling from a height. It works by using a combination of a harness, a lanyard, and an anchor point. The harness is worn by the person and is connected to the lanyard, which is then attached to the anchor point. If the person falls, the lanyard will automatically lock and prevent them from falling any further. This system is commonly used in construction, window cleaning, and other industries where working at heights is required.

There are several types of fall arresters available in Australia, including:

• Self-retracting lifelines (SRLs): These devices use a spring-loaded mechanism to retract the lifeline as the user moves, reducing the risk of tripping or snagging.
• Shock-absorbing lanyards: These lanyards have a built-in shock absorber that reduces the impact of a fall on the user's body.
• Rope grabs: These devices attach to a vertical lifeline and allow the user to move up or down the line while automatically locking in the event of a fall.
• Horizontal lifelines: These systems consist of a cable or rope that is secured between two anchor points, allowing users to move horizontally while remaining attached to the lifeline.
• Harnesses: These are worn by the user and provide a secure attachment point for the fall arrester. They come in various styles and sizes to fit different body types and work environments.

Anchor points: These are the fixed points to which fall arresters are attached. They can be permanent or temporary and must be able to support the weight of the user in the event of a fall.

Fall arresters in Australia must meet the safety standards set by the Australian/New Zealand Standard AS/NZS 1891:200 This standard outlines the requirements for fall arrest systems, including the design, construction, and testing of fall arresters. The standard also specifies the minimum strength and performance requirements for fall arresters and the materials used in their construction. Additionally, fall arresters must be inspected and maintained regularly to ensure they continue to meet safety standards. Employers are responsible for providing appropriate fall arrest equipment and ensuring that workers are trained in its use.

The maximum weight capacity of a fall arrester depends on the specific model and manufacturer. It is important to check the product specifications and instructions before use to ensure that it is suitable for the weight of the user and the job being performed. Generally, fall arresters are designed to support weights ranging from 130 to 310 pounds.

Fall arresters can be used for many types of work at heights, but they may not be suitable or effective for all situations. It is important to assess the specific risks and requirements of each job and choose the appropriate fall protection equipment, which may include other types of fall protection systems such as guardrails or safety nets.

Choosing the right fall arrester depends on several factors, including the type of work you will be doing, the height at which you will be working, and the type of anchor point available. It is important to choose a fall arrester that is certified by a reputable organization and meets all safety standards. Consider the weight capacity, ease of use, and comfort of the fall arrester when making your decision. It is also important to regularly inspect and maintain your fall arrester to ensure it is functioning properly.

Fall arresters should be inspected and maintained before each use, and at least once a year by a competent person. Additionally, if the fall arrester has been involved in a fall, it should be immediately removed from service and inspected by a competent person before being used again.

No, fall arresters cannot be reused after a fall arrest event. They are designed to absorb the impact of a fall and must be replaced after use to ensure they are still capable of protecting the user in the event of another fall. It is important to follow the manufacturer's instructions for inspection and replacement of fall arresters to ensure their effectiveness and safety.

It is recommended to follow the manufacturer's guidelines for inspection and replacement of components. Generally, fall arresters should be replaced every five years or after a significant fall.