Diamond Blades & Bevels Suppliers in Sydney

The best diamond blade for cutting concrete is a segmented diamond blade with a high diamond concentration and a hard bond. This type of blade is designed to withstand the abrasiveness of concrete and provide a clean and precise cut. It is also important to choose the right size and RPM rating for the blade to ensure optimal performance and safety.

A wet diamond blade is designed to be used with water, which cools the blade and prevents dust and debris from flying around. It is typically used for cutting harder materials such as concrete, tile, and stone. A dry diamond blade, on the other hand, is designed to be used without water and is typically used for cutting softer materials such as wood, plastic, and metal. Dry blades generate more heat and dust than wet blades, so they require more frequent blade changes and can be more difficult to use safely.

Diamond blades can last anywhere from a few hours to several months, depending on the quality of the blade, the material being cut, and the frequency of use. High-quality diamond blades can last up to 100 hours of cutting time, while lower quality blades may only last a few hours. It is important to properly maintain and care for diamond blades to ensure maximum lifespan.

The size of the diamond blade you need for your saw depends on the size of your saw's arbor and the depth of the cut you need to make. You should consult your saw's manual or contact the manufacturer to determine the appropriate blade size for your specific saw model.

Yes, diamond blades can be sharpened using a diamond blade sharpener or a diamond file. However, it is important to note that diamond blades should only be sharpened by professionals or experienced individuals as improper sharpening can damage the blade and reduce its lifespan. Additionally, some diamond blades are designed to be disposable and cannot be sharpened.

A segmented diamond blade has gaps between the diamond segments that allow for cooling and debris removal during cutting. It is best used for cutting hard materials such as concrete, brick, and stone.

A continuous rim diamond blade has a solid rim of diamonds that provides a smooth and clean cut. It is best used for cutting softer materials such as ceramic, porcelain, and glass.

The best diamond blade for cutting tiles is a continuous rim diamond blade with a diameter of 4-7 inches and a thickness of 0.05-0.1 inches. It should have a high diamond concentration and a soft bond to ensure smooth and precise cuts without chipping or cracking the tiles. Some recommended brands include DEWALT, Bosch, and MK Diamond.

Choosing the right diamond blade for your project depends on several factors such as the material you are cutting, the size and thickness of the material, the type of saw you are using, and the desired finish. You should consider the blade's diameter, arbor size, blade thickness, diamond concentration, and bond type. For example, a blade with a high diamond concentration and a soft bond is suitable for cutting hard materials like granite, while a blade with a lower diamond concentration and a hard bond is better for cutting softer materials like asphalt. It is important to choose a blade that is compatible with your saw and to follow the manufacturer's instructions for use and safety precautions.

However, the maximum RPM for diamond blades varies depending on the size and type of blade. It is important to refer to the manufacturer's specifications for the specific blade being used to determine the maximum RPM. Exceeding the maximum RPM can cause the blade to break or fail, resulting in potential injury or damage to equipment.

To properly care for and maintain your diamond blade, follow these steps:

• Keep the blade clean: After each use, clean the blade with water and a soft brush to remove any debris or residue.
• Store the blade properly: Store the blade in a dry, cool place to prevent rust and damage.
• Use the right blade for the job: Make sure you are using the correct blade for the material you are cutting.
• Use water: When cutting, use water to cool the blade and reduce dust.
• Check for damage: Before each use, inspect the blade for any cracks or damage. If you see any damage, replace the blade immediately.
• Sharpen the blade: Over time, the blade will become dull. Sharpen the blade using a diamond sharpening stone or have it professionally sharpened.
• Use a blade guard: When not in use, use a blade guard to protect the blade from damage.

By following these steps, you can extend the life of your diamond blade and ensure it performs at its best.