AerService - Centrifugal Fan | EV Fan Get latest price

Centrifugal Fan | EV Fan

In Stock

The EV is a single inlet centrifugal fan suitable to move air with low dust concentration. The low flow and low pressure characteristics allow for a variety of uses for this fan (with extraction arms) to guarantee optimal yields (low energy consumption) with low noise impact.

Key Features

• Structure: made entirely of welded sheet steel of adequate thickness and painted with epoxy powders in black RAL 9005.
• Impellers: curved forward-lined blades, made of galvanized steel sheet and statically and dynamically balanced according to ISO Standards, keeping noise and vibrations at minimum levels.
• Options: ATEX versions available.

Typical Environments

• For use in welding, industry and automotive environments where there is a requirement for fume and light dust extraction. 

Accessories

• Soundproof cabin for centrifugal fans - without ventilation
• Electrical panel
• RPI-M - automatic control system for extraction systems
• Encased 4-Pole Selector

Specifications

Fan model:	EV15 | EV18 | EV30
Power (kW):	1.1  | 1.5  | 2.2
RPM:	2850
Flow rate (m³/h):	200-3000
Pressure (Pa):	320-1800
Impeller Ø min-max mm:	130 - 250
Volt:	400V/50-60Hz
IP Rating:	IP55
Fluid limit temp (min-max) Celsius	-25 | +60
Noise (dB(A)):	74.1 | 74.1 | 77
Packaged weight :	60kg (max)
Location:	Fixed

 

Read more...

To contact Dynamic Engineering Australia about AerService Centrifugal Fan | EV Fan use Get a quote.

The EV is a single inlet centrifugal fan suitable to move air with low dust concentration. The low flow and low pressure characteristics allow for a variety of uses for this fan (with extraction arms) to guarantee optimal yields (low energy consumption) with low noise impact.

Key Features

• Structure: made entirely of welded sheet steel of adequate thickness and painted with epoxy powders in black RAL 9005.
• Impellers: curved forward-lined blades, made of galvanized steel sheet and statically and dynamically balanced according to ISO Standards, keeping noise and vibrations at minimum levels.
• Options: ATEX versions available.

Typical Environments

• For use in welding, industry and automotive environments where there is a requirement for fume and light dust extraction. 

Accessories

• Soundproof cabin for centrifugal fans - without ventilation
• Electrical panel
• RPI-M - automatic control system for extraction systems
• Encased 4-Pole Selector

Specifications

Fan model:	EV15 | EV18 | EV30
Power (kW):	1.1  | 1.5  | 2.2
RPM:	2850
Flow rate (m³/h):	200-3000
Pressure (Pa):	320-1800
Impeller Ø min-max mm:	130 - 250
Volt:	400V/50-60Hz
IP Rating:	IP55
Fluid limit temp (min-max) Celsius	-25 | +60
Noise (dB(A)):	74.1 | 74.1 | 77
Packaged weight :	60kg (max)
Location:	Fixed

 

Read less...

To contact Dynamic Engineering Australia about AerService Centrifugal Fan | EV Fan use Get a quote.