WLINK - Industrial 2.4GHz 4G CAT4 LTE Router | WL-G520 Price Guide: $315 Get latest price

Industrial 2.4GHz 4G CAT4 LTE Router | WL-G520

In Stock

WLINK WL-G520 is equipped with the Gigabit Ethernet Port and supplies both 2.4G and 5G Dual WiFi. Simultaneous 2.4G and 5G Wi-Fi gives the users two independent Wi-Fi network which also help reduce 2.4G Wi-Fi congestion and interference to ensure fast and reliable network service.

With the world's leading ARM Cortex A7 900MHz CPU, WL-G520 achieves data rates up to 1 Gbps and enables gigabit routing. 

WLINK G520 also equips serial port as well as a variety of configuration option including GPS and storage. It offers redundant SIM Slot for automatic switching for reliable network, plus terminal block power capability. Advanced routing functionality allows network segmentation and protection of mission critical data. An extensive range of redundancy technologies ensures uninterrupted operation. Thanks to a rugged design and a high industrial temperature span, G520 are suitable for a wide variety of industrial applications.

FDD-LTE: B1/B2/B3/B4/B5/B7/B8/B28

Optional Cellular Network	Ethernet Standard
LTE-Advanced / FDD-LTE / TDD-LTE 4G DC-HSPA+/HSPA+ /HSPA/HSDPA EDGE/GPRS Support future 5G	10/100/1000 Base-T (IEEE 802.3) Mode: Full or half duplex (self-adaptive)
WLAN	Hardware System
Standard:  Dual Radio, 2.4G and 5G WiFi for local coverage                     IEE 802.11ac compliant & backward compatible with 802.11a/b/g/n Security: WEP, WPA and WPA2   encryption Mode: AP, Client, station, bridge mode support	CPU: Cortex A7 Core. 900MHz/867Mbps Memory: 128Mb Flash, 1Gb DDR3 RAM Storage: SD U Disk inside mainboard
Route Protocol	VPN Tunnel
Static route RIPv2/OSPF dynamic route	IPSec  PPTP/L2TP client GRE OpenVPN
Firewall & Filter	GPS (Optional)
IP packet/Domain/MAC filter NAT DMZ	GPS sensitivity: -160dBm GPS accuracy: 2.5m CEP Update Rate: 1Hz@5Hz Time to First Fix: Cold Status 27s, Hot status 1S Protocol: NMEA-0183 2.3V
Device Management	LED Instruction
Local or remote web browser (IE v8 or   above) CLI/Telnet command M2M management platform (optional) SSH configuration (optional)	NET WLAN WAN LAN (LAN1 to LAN4
Power Consumption	Other
Operate: 520mA@+12VDC,             Idle: 400mA@+12VDC            Power Supply: 7.5VDC-32VDC (max 48VDC extenable)           Over Voltage protect           Connect protection	Dimension: 150mm x 102mm x 25.5mm                          (not including antenna) Weight: 410g Operation temperature: -30 ~ +70 degree      Storage temperature: -40 ~ +85 degree      Relative humidity: <95%   (non-condensing) Guarantee: one year
Interface	Package Contents
5× Gigabit Ethernet (3xLAN,1xWAN/LAN) 1x RS232 (RS485 optional) 1x DC power inteface 5x SMA-K antenna interface 1/2x Standard SIM/R-UIM slot	1x 4G/3G Router 2x Wi-Fi antenna 2x 4G Magnetic antenna 1x Ethernet Cable 1x Power Supply Adapter 1x DIN Rail Mounting Kits

Read more...

To contact Wireless Professional Solutions about WLINK Industrial 2.4GHz 4G CAT4 LTE Router | WL-G520 use Get a quote.

WLINK WL-G520 is equipped with the Gigabit Ethernet Port and supplies both 2.4G and 5G Dual WiFi. Simultaneous 2.4G and 5G Wi-Fi gives the users two independent Wi-Fi network which also help reduce 2.4G Wi-Fi congestion and interference to ensure fast and reliable network service.

With the world's leading ARM Cortex A7 900MHz CPU, WL-G520 achieves data rates up to 1 Gbps and enables gigabit routing. 

WLINK G520 also equips serial port as well as a variety of configuration option including GPS and storage. It offers redundant SIM Slot for automatic switching for reliable network, plus terminal block power capability. Advanced routing functionality allows network segmentation and protection of mission critical data. An extensive range of redundancy technologies ensures uninterrupted operation. Thanks to a rugged design and a high industrial temperature span, G520 are suitable for a wide variety of industrial applications.

FDD-LTE: B1/B2/B3/B4/B5/B7/B8/B28

Optional Cellular Network	Ethernet Standard
LTE-Advanced / FDD-LTE / TDD-LTE 4G DC-HSPA+/HSPA+ /HSPA/HSDPA EDGE/GPRS Support future 5G	10/100/1000 Base-T (IEEE 802.3) Mode: Full or half duplex (self-adaptive)
WLAN	Hardware System
Standard:  Dual Radio, 2.4G and 5G WiFi for local coverage                     IEE 802.11ac compliant & backward compatible with 802.11a/b/g/n Security: WEP, WPA and WPA2   encryption Mode: AP, Client, station, bridge mode support	CPU: Cortex A7 Core. 900MHz/867Mbps Memory: 128Mb Flash, 1Gb DDR3 RAM Storage: SD U Disk inside mainboard
Route Protocol	VPN Tunnel
Static route RIPv2/OSPF dynamic route	IPSec  PPTP/L2TP client GRE OpenVPN
Firewall & Filter	GPS (Optional)
IP packet/Domain/MAC filter NAT DMZ	GPS sensitivity: -160dBm GPS accuracy: 2.5m CEP Update Rate: 1Hz@5Hz Time to First Fix: Cold Status 27s, Hot status 1S Protocol: NMEA-0183 2.3V
Device Management	LED Instruction
Local or remote web browser (IE v8 or   above) CLI/Telnet command M2M management platform (optional) SSH configuration (optional)	NET WLAN WAN LAN (LAN1 to LAN4
Power Consumption	Other
Operate: 520mA@+12VDC,             Idle: 400mA@+12VDC            Power Supply: 7.5VDC-32VDC (max 48VDC extenable)           Over Voltage protect           Connect protection	Dimension: 150mm x 102mm x 25.5mm                          (not including antenna) Weight: 410g Operation temperature: -30 ~ +70 degree      Storage temperature: -40 ~ +85 degree      Relative humidity: <95%   (non-condensing) Guarantee: one year
Interface	Package Contents
5× Gigabit Ethernet (3xLAN,1xWAN/LAN) 1x RS232 (RS485 optional) 1x DC power inteface 5x SMA-K antenna interface 1/2x Standard SIM/R-UIM slot	1x 4G/3G Router 2x Wi-Fi antenna 2x 4G Magnetic antenna 1x Ethernet Cable 1x Power Supply Adapter 1x DIN Rail Mounting Kits

Read less...

To contact Wireless Professional Solutions about WLINK Industrial 2.4GHz 4G CAT4 LTE Router | WL-G520 use Get a quote.