The PM2 series works by ramping up and down to coincide with your air demands, supplying only the amount of air and constant pressure needed. Unlike fixed-speed compressors, the SCR PM2’s goal is to keep the compressor continually on load and avoid running time offload. PM2 compressors have a wide variable range of 40-100%, making them suitable for multiple applications, resulting in significant energy savings and minimising CO2 emissions.
PURE SOFT-START SYSTEM AS STANDARD
Soft-start system reduces the electric current during start-up
On start-up, traditional fixed-speed compressors, with direct online or star-delta starters, can draw up to 3.5 times their full load current. The soft-start technology on the PM2 variable speed ensures that the starting current never exceeds the rated value.
Features:
1. PERMANENT MAGNET MOTOR
Reach IE4 efficiency standard
Lubricant-cooled motor
VSD: variable speed drive
IP65 protection
2. NEW IMPROVED AIREND
New improved rotor profile
R&D in Japan
Designed to give many years of reliable operation
3. INNOVATIVE INOVANCE INVERTER
Wide voltage design
Meets C3 and C3 EMC requirements
Built-in DC reactor
Independent cooling air duct design
Robust enclosure for trouble-free operation even in the harshest of conditions
4. EXTERNAL GAUGES
Easy-to-read gauges
Internal compressor pressure reading
System pressure reading
5. AIR INLET FILTER
Nanoscale heavy duty
Filtration accuracy up to 99.9%
Dust particles below 0.3 micron
Extends the service life of the lubricating oil and oil filter
6. INLET VALVE
Optimises the inlet flow of the airend
No blowdown losses
Full aluminium maintenance-free design
High vacuum degree: 700mmhg
Large suction area
Low load energy consumption in unloaded operation
Fluoro rubber for improved valve seal
7. COOLING FAN
Compact
Low noise level
High capacity for optimized cooling
Low power consumption
8. OIL FILTER
High-efficiency oil filter removes contaminants from the oil
Oil particles can be controlled at 0.1 micron
Ensures a smooth and well-lubricated oil system
9. INTEGRATED AIR RECEIVER & AIR/OIL SEPARATOR TANK
AS1210 designed and certified
Patented integrated design
Reduces compressor’s overall size
10. SPIN-ON SEPARATION SYSTEM
The high-efficiency oil separator ensures that the oil carryover is less than 3ppm
System pressure loss is less than 0.02mpa
Dramatically reduces maintenance and down time
System pressure loss is less than 0.02mpa
11. ALL-STEEL INTERNAL PIPE SYSTEM
All-steel internal pipework and compression joints prevent leakage and premature ageing, often seen with flexible pipes
The PM2 series works by ramping up and down to coincide with your air demands, supplying only the amount of air and constant pressure needed. Unlike fixed-speed compressors, the SCR PM2’s goal is to keep the compressor continually on load and avoid running time offload. PM2 compressors have a wide variable range of 40-100%, making them suitable for multiple applications, resulting in significant energy savings and minimising CO2 emissions.
PURE SOFT-START SYSTEM AS STANDARD
Soft-start system reduces the electric current during start-up
On start-up, traditional fixed-speed compressors, with direct online or star-delta starters, can draw up to 3.5 times their full load current. The soft-start technology on the PM2 variable speed ensures that the starting current never exceeds the rated value.
Features:
1. PERMANENT MAGNET MOTOR
Reach IE4 efficiency standard
Lubricant-cooled motor
VSD: variable speed drive
IP65 protection
2. NEW IMPROVED AIREND
New improved rotor profile
R&D in Japan
Designed to give many years of reliable operation
3. INNOVATIVE INOVANCE INVERTER
Wide voltage design
Meets C3 and C3 EMC requirements
Built-in DC reactor
Independent cooling air duct design
Robust enclosure for trouble-free operation even in the harshest of conditions
4. EXTERNAL GAUGES
Easy-to-read gauges
Internal compressor pressure reading
System pressure reading
5. AIR INLET FILTER
Nanoscale heavy duty
Filtration accuracy up to 99.9%
Dust particles below 0.3 micron
Extends the service life of the lubricating oil and oil filter
6. INLET VALVE
Optimises the inlet flow of the airend
No blowdown losses
Full aluminium maintenance-free design
High vacuum degree: 700mmhg
Large suction area
Low load energy consumption in unloaded operation
Fluoro rubber for improved valve seal
7. COOLING FAN
Compact
Low noise level
High capacity for optimized cooling
Low power consumption
8. OIL FILTER
High-efficiency oil filter removes contaminants from the oil
Oil particles can be controlled at 0.1 micron
Ensures a smooth and well-lubricated oil system
9. INTEGRATED AIR RECEIVER & AIR/OIL SEPARATOR TANK
AS1210 designed and certified
Patented integrated design
Reduces compressor’s overall size
10. SPIN-ON SEPARATION SYSTEM
The high-efficiency oil separator ensures that the oil carryover is less than 3ppm
System pressure loss is less than 0.02mpa
Dramatically reduces maintenance and down time
System pressure loss is less than 0.02mpa
11. ALL-STEEL INTERNAL PIPE SYSTEM
All-steel internal pipework and compression joints prevent leakage and premature ageing, often seen with flexible pipes