VHS-K10 Digital Telephone and Data Circuits ...
raditional shunt-connected gas filled arresters by themselves can no longer provide adequate or required protection for sensitive line cards or newer generation digital switching systems.
The VHS-K10 contains ten line protection circuits on a single PCB. Each circuit consists of a primary three terminal gas filled arrester followed by a secondary transient clamping circuit.
The gas arrester provides common mode protection by bypassing transient currents to ground. The arrester chosen has a fast impulse response compatible with the requirements of advanced high-speed data networks.
The VHS-K10 is earthed through two spring clips which connect to the KRONE LSA* frame. These
robust tabs provide excellent electrical contact with the frame.
Application
The VHS-K10 is designed for installation into the Krone LSA-Plus Series 2* termination system. The VHS-K10 must be installed into disconnect blocks to allow the series impedance elements to be inserted in circuit.
Applications include the protection of telephone, data networks used for process control and automation. The VHS-K10 can be used to protect at the MDF, Public Exchange (PSTN), PBX, Key Telephone Systems (KTS), Pay phone, as well as data distribution systems, remote instrumentation, radio transmitters etc. Suitable for primary and basic rate ISDN, Broad band ADSL, E1/T1 and PCM applications.
To contact Lightning Down Under Pty Ltd about VHS-K10 Digital Telephone and Data Circuits Protector use Get a quote.
raditional shunt-connected gas filled arresters by themselves can no longer provide adequate or required protection for sensitive line cards or newer generation digital switching systems.
The VHS-K10 contains ten line protection circuits on a single PCB. Each circuit consists of a primary three terminal gas filled arrester followed by a secondary transient clamping circuit.
The gas arrester provides common mode protection by bypassing transient currents to ground. The arrester chosen has a fast impulse response compatible with the requirements of advanced high-speed data networks.
The VHS-K10 is earthed through two spring clips which connect to the KRONE LSA* frame. These
robust tabs provide excellent electrical contact with the frame.
Application
The VHS-K10 is designed for installation into the Krone LSA-Plus Series 2* termination system. The VHS-K10 must be installed into disconnect blocks to allow the series impedance elements to be inserted in circuit.
Applications include the protection of telephone, data networks used for process control and automation. The VHS-K10 can be used to protect at the MDF, Public Exchange (PSTN), PBX, Key Telephone Systems (KTS), Pay phone, as well as data distribution systems, remote instrumentation, radio transmitters etc. Suitable for primary and basic rate ISDN, Broad band ADSL, E1/T1 and PCM applications.
To contact Lightning Down Under Pty Ltd about VHS-K10 Digital Telephone and Data Circuits Protector use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product