The TDS-110 is a universal meter for measuring thickness of dense solids.
Description
40 Recent ViewsIn Stock
Whilst it is offered in the context of being used to measure pipe wall thickness for calibrating transit time flow meters, it is usefull for any production or maintenance measurements. Calibration is determined by entering the velocity of sound in the measured material - then the meter will read wall thickness. There is a look up table for common materials. Zero, calibration and two point calibrations are possible
Data can be saved in 5 files of 100 readings and downloaded to a PC using the cable supplied.
Features
Measuring range for 0.75mm to 300.0mm
Sound velocity setting range 1000-9999m/sec
Resolution 0.01mm to 99.99mm then 0.1mm above that
Accuracy 0.5% +0.02mm - depending on material and conditions
5MHz probe - Lower limit for steel pipe dia 20mm x 3mm
10MHz probe - Lower limit for steel pipe dia 15mm x 2mm
For printers and other options - see data sheet.
To contact ECEFast about Ultrasonic Thickness Gauge DH-TDS110 use Get a quote.
Whilst it is offered in the context of being used to measure pipe wall thickness for calibrating transit time flow meters, it is usefull for any production or maintenance measurements. Calibration is determined by entering the velocity of sound in the measured material - then the meter will read wall thickness. There is a look up table for common materials. Zero, calibration and two point calibrations are possible
Data can be saved in 5 files of 100 readings and downloaded to a PC using the cable supplied.
Features
Measuring range for 0.75mm to 300.0mm
Sound velocity setting range 1000-9999m/sec
Resolution 0.01mm to 99.99mm then 0.1mm above that
Accuracy 0.5% +0.02mm - depending on material and conditions
5MHz probe - Lower limit for steel pipe dia 20mm x 3mm
10MHz probe - Lower limit for steel pipe dia 15mm x 2mm