Tungsten Carbide / Chrome Carbide etc. Coating System

Tungsten Carbide / Chrome Carbide etc. Coating System

AK HVAF systems work reliably with LPG fuels such as propane, propane-butane, propylene and MAPP-gas as well as with methane and natural gas.

The HVAF systems spray metals and carbides at optimal temperature without overheating, and are used for spraying bulk-like gas and liquid impermeable wear and corrosion-resistant coatings.

We supply a large variety of different guns in our AK HVAF product line, with a wide tuning range that allows for metal spraying, MCrAlY, chromium carbide, tungsten carbide and other stainless steel, nickel and cobalt-based coatings.

The key factors of the cost advantage of Kermetico HVAF technology:

• HVAF spray just a fraction of the HVOF spray time, with higher deposition efficiency, with coatings harder and longer lasting

• 20-30% higher deposition efficiency, 30% less hardness deviation than any HVOF system

• By choosing Kermetico AK HVAF, a HVOF job shop gains at least a 50% cost advantage to HVOF competitors and additional coating quality advantage as a “bonus.”

• No oxygen in HVAF mode – just compressed air, which costs 10 times less.

• Easy-to-change specialized guns allow spraying each part in the most efficient way.
• The same setup is used for blasting and thermal spray coating using the same gun that results in further reductions of time.
• The cost of consumed spare parts is 1/10 of the conventional HVOF expenses for the same work.
• The Kermetico HVAF AK line is an all-in-one system operating several specific guns: Universal, big OD, small OD, ID, rotating ID and hand-held. This requires less investment in a Kermetico HVAF system and makes the payback period shorter.

Read more...

To contact MSSA Interweld about Tungsten Carbide / Chrome Carbide etc. Coating System use Get a quote.

AK HVAF systems work reliably with LPG fuels such as propane, propane-butane, propylene and MAPP-gas as well as with methane and natural gas.

The HVAF systems spray metals and carbides at optimal temperature without overheating, and are used for spraying bulk-like gas and liquid impermeable wear and corrosion-resistant coatings.

We supply a large variety of different guns in our AK HVAF product line, with a wide tuning range that allows for metal spraying, MCrAlY, chromium carbide, tungsten carbide and other stainless steel, nickel and cobalt-based coatings.

The key factors of the cost advantage of Kermetico HVAF technology:

• HVAF spray just a fraction of the HVOF spray time, with higher deposition efficiency, with coatings harder and longer lasting

• 20-30% higher deposition efficiency, 30% less hardness deviation than any HVOF system

• By choosing Kermetico AK HVAF, a HVOF job shop gains at least a 50% cost advantage to HVOF competitors and additional coating quality advantage as a “bonus.”

• No oxygen in HVAF mode – just compressed air, which costs 10 times less.

• Easy-to-change specialized guns allow spraying each part in the most efficient way.
• The same setup is used for blasting and thermal spray coating using the same gun that results in further reductions of time.
• The cost of consumed spare parts is 1/10 of the conventional HVOF expenses for the same work.
• The Kermetico HVAF AK line is an all-in-one system operating several specific guns: Universal, big OD, small OD, ID, rotating ID and hand-held. This requires less investment in a Kermetico HVAF system and makes the payback period shorter.

Read less...

To contact MSSA Interweld about Tungsten Carbide / Chrome Carbide etc. Coating System use Get a quote.