Terex - Impact Crusher | i-140

Impact Crusher | i-140

Impact Crusher | i-140

This new generation impact crusher with redefined style and advanced technological design gives improved material flow and production capabilities in quarrying, mining, demolition and recycling applications. Incorporating the a Terex CR032 impact chamber with direct drive and advanced electronic control system the machine provides operators with high material reduction ratios and produces a consistent product shape. The high productivity, ease of maintenance and operation makes the machine an ideal solution for large scale producers and contact crushing operators.

STANDARD FEATURES

ENGINE:
Tier 3 / Stage IIIA – Caterpillar C15 403kW (540hp)
Stage IIIA Constant Speed: Scania DC13 371kW (498 hp)

IMPACT CHAMBER:
Terex CR032 Impact chamber
Fully Hydraulically assisted apron setting and hydraulic apron release
Manual raise chamber fl ap allowing extra inlet clearance
4 bar rotor – Tool steel blow bars 2 High & 2 Low
Direct Drive via Clutch
Drive belt tensioner wheel
Blow bar lifting tool supplied
Tip Speed range 35-44 m/sec (115-144 ft./sec)

HOPPER / FEEDER:
VGF Fixed Hopper
Stepped grizzly feeder with integral pre-screen, standard 50mm spacing
Mesh aperture on grizzly feeder: 38mm
Selectable discharge to by-pass conveyor or main conveyor
Blanking mat for VGF

MAIN CONVEYOR:
Belt width: 1.3m (52”)
Hydraulic raise/ lower for magnet

AUXILARY CONVEYORS:
Piped for overband magnet

CLIMATE SPEC:
Standard oils – (Recommended for ambient temperatures between -5 to +30ºC)

DUST SUPRESSION:
Piped for dust suppression c/w Spray bars

ELECTRICAL:
Emergency stops
Hand Held Track Control Set with Connection Lead
T-Link Telemetry System fi tted c/w 3 years data subscription

GENERAL:
Safety Guards in Compliance with Machinery Directive
2 Speed Tracking

 

Read more...

To contact OPS Screening & Crushing Equipment about Terex Impact Crusher | i-140 use Get a quote.

This new generation impact crusher with redefined style and advanced technological design gives improved material flow and production capabilities in quarrying, mining, demolition and recycling applications. Incorporating the a Terex CR032 impact chamber with direct drive and advanced electronic control system the machine provides operators with high material reduction ratios and produces a consistent product shape. The high productivity, ease of maintenance and operation makes the machine an ideal solution for large scale producers and contact crushing operators.

STANDARD FEATURES

ENGINE:
Tier 3 / Stage IIIA – Caterpillar C15 403kW (540hp)
Stage IIIA Constant Speed: Scania DC13 371kW (498 hp)

IMPACT CHAMBER:
Terex CR032 Impact chamber
Fully Hydraulically assisted apron setting and hydraulic apron release
Manual raise chamber fl ap allowing extra inlet clearance
4 bar rotor – Tool steel blow bars 2 High & 2 Low
Direct Drive via Clutch
Drive belt tensioner wheel
Blow bar lifting tool supplied
Tip Speed range 35-44 m/sec (115-144 ft./sec)

HOPPER / FEEDER:
VGF Fixed Hopper
Stepped grizzly feeder with integral pre-screen, standard 50mm spacing
Mesh aperture on grizzly feeder: 38mm
Selectable discharge to by-pass conveyor or main conveyor
Blanking mat for VGF

MAIN CONVEYOR:
Belt width: 1.3m (52”)
Hydraulic raise/ lower for magnet

AUXILARY CONVEYORS:
Piped for overband magnet

CLIMATE SPEC:
Standard oils – (Recommended for ambient temperatures between -5 to +30ºC)

DUST SUPRESSION:
Piped for dust suppression c/w Spray bars

ELECTRICAL:
Emergency stops
Hand Held Track Control Set with Connection Lead
T-Link Telemetry System fi tted c/w 3 years data subscription

GENERAL:
Safety Guards in Compliance with Machinery Directive
2 Speed Tracking

 

Read less...

To contact OPS Screening & Crushing Equipment about Terex Impact Crusher | i-140 use Get a quote.

Brochure(1.67MB)