Long Life Cylinder MS series cylinder end caps are manufactured from AISI 316 Stainless Steel and the barrel is in 304 Stainless Steel.
High Speed – Low Noise TecnAir microbore cylinders are designed for high speed operation and incorporate nitrile rubber buffer rings in the piston to relieve impact and reduce noise operating levels to 70dB(A).
High Performance Wiper Seal The wiper seal is produced in a single part moulding using a special polyurethane compound requiring no circlip to retain the seal, improving the clean-line aspects of the cylinder. This unique design provides high frequency operation combined with a high resistance to wear. The material is highly resilliant against corrosion.
Clean Line End Caps The end caps are machined from solid AISI 316 stainless steel bar to a smooth finish, clean line to eliminate contamination traps. The clean-line barrel is manufactures from AISI 304 stainless steel with polished internal bore for maximum strength.
ATEX Certified MS cylinders can be ordered with ATEX certification according to directive 94/9/EC
TECHNICAL DATA
Type
Stainless steel cylinder
Bore (mm)
16 / 20 / 25
Mounting
ISO 6432
Stroke
1 metre (max)
Operating Pressure
1.5 – 10 bar
Fluid
Filtered 50μ. Use with or without lubrication
Operating temperature
Max + 80° Min -20°
Cushions
Mechanical (Adjustable pneumatic cushioning upon request)
To contact Tecnair about Tecnair Stainless Microbore Cylinders | MS Series use Get a quote.
Long Life Cylinder MS series cylinder end caps are manufactured from AISI 316 Stainless Steel and the barrel is in 304 Stainless Steel.
High Speed – Low Noise TecnAir microbore cylinders are designed for high speed operation and incorporate nitrile rubber buffer rings in the piston to relieve impact and reduce noise operating levels to 70dB(A).
High Performance Wiper Seal The wiper seal is produced in a single part moulding using a special polyurethane compound requiring no circlip to retain the seal, improving the clean-line aspects of the cylinder. This unique design provides high frequency operation combined with a high resistance to wear. The material is highly resilliant against corrosion.
Clean Line End Caps The end caps are machined from solid AISI 316 stainless steel bar to a smooth finish, clean line to eliminate contamination traps. The clean-line barrel is manufactures from AISI 304 stainless steel with polished internal bore for maximum strength.
ATEX Certified MS cylinders can be ordered with ATEX certification according to directive 94/9/EC
TECHNICAL DATA
Type
Stainless steel cylinder
Bore (mm)
16 / 20 / 25
Mounting
ISO 6432
Stroke
1 metre (max)
Operating Pressure
1.5 – 10 bar
Fluid
Filtered 50μ. Use with or without lubrication
Operating temperature
Max + 80° Min -20°
Cushions
Mechanical (Adjustable pneumatic cushioning upon request)