RDM Test Equipment Laboratory Heat Sealer ...

RDM Test Equipment - Laboratory Heat Sealer | HS-2

Supplier: Inspection Systems

Laboratory Heat Sealer | HS-2

For precise measurement of heat sealability of flexible packaging. Produces seals up to 50mm long x 5 to 25mm wide.

In Stock

Features of this product

Choose heat sealing bar configuration, either single (upper) or dual (upper & lower, meets ASTM F2029)
User can easily change sealing bar for various surface areas or surface finishes
Accurate and repeatable seals due to precision ground sealing faces and jaw guidance system
Versatile applications for flexible materials, blister packs and pots
Low Maintenance - 12 months between calibrations
Precise pressure calibration of standard surface area jaw face
Temperature, pressure and dwell time digital controllers
Jaws constructed in aluminum and silicone with precision ground faces
Range of jaw face surfaces including Matched Crimp and Teflon Coating
Auto cycle feature for greater user convenience with multiple samples

Specifications of this product

Seal Width: 50 mm max.
Temperature Control: Range: Ambient to 300°C, Accuracy: +/- 0.5%, Operating Accuracy: +/-2°C. Single (Upper) sealing jaw temperature control, or Dual (Upper & Lower) sealing jaw temperature control
Pressure: Range: 0 to 100psi (6.8bar, 689Kpa), via precision regulator and digital display. Accuracy +/-5%, Repeatability +/- 0.02psi . Supply via clean and dry compressed airline or bottled air/nitrogen at 90 to 100psi
Dwell Time: Range: 0.1 to 99.9 sec., Resolution 0.01 sec
Auto Cycle & Delay Time: Delay Time: Range: 0.1 to 99.9 sec For automatic cycling of sealing bars used in manual production environments. Assists with correct alignment of sample. Electronic processor controlled.
Jaw Guidance System: Dovetail slide on jaws with quick release mechanism.
Sealing Jaws: Standard flat jaws 25mm x 50mm, constructed in aluminium with precision ground face. Lower sealing jaw with precision ground silicone rubber face. (See options below)
Environment: 5-50ºC ambient operating temperature, RH 75% max (non-condensing)
Power: 240V AC 50/60 Hz (110V AC voltage available on request)
Dimensions: W 31 x D 46 x H 50 cm, 24kg

To contact Inspection Systems about RDM Test Equipment Laboratory Heat Sealer | HS-2 use Get a quote.

Features of this product

Choose heat sealing bar configuration, either single (upper) or dual (upper & lower, meets ASTM F2029)
User can easily change sealing bar for various surface areas or surface finishes
Accurate and repeatable seals due to precision ground sealing faces and jaw guidance system
Versatile applications for flexible materials, blister packs and pots
Low Maintenance - 12 months between calibrations
Precise pressure calibration of standard surface area jaw face
Temperature, pressure and dwell time digital controllers
Jaws constructed in aluminum and silicone with precision ground faces
Range of jaw face surfaces including Matched Crimp and Teflon Coating
Auto cycle feature for greater user convenience with multiple samples

Specifications of this product

Seal Width: 50 mm max.
Temperature Control: Range: Ambient to 300°C, Accuracy: +/- 0.5%, Operating Accuracy: +/-2°C. Single (Upper) sealing jaw temperature control, or Dual (Upper & Lower) sealing jaw temperature control
Pressure: Range: 0 to 100psi (6.8bar, 689Kpa), via precision regulator and digital display. Accuracy +/-5%, Repeatability +/- 0.02psi . Supply via clean and dry compressed airline or bottled air/nitrogen at 90 to 100psi
Dwell Time: Range: 0.1 to 99.9 sec., Resolution 0.01 sec
Auto Cycle & Delay Time: Delay Time: Range: 0.1 to 99.9 sec For automatic cycling of sealing bars used in manual production environments. Assists with correct alignment of sample. Electronic processor controlled.
Jaw Guidance System: Dovetail slide on jaws with quick release mechanism.
Sealing Jaws: Standard flat jaws 25mm x 50mm, constructed in aluminium with precision ground face. Lower sealing jaw with precision ground silicone rubber face. (See options below)
Environment: 5-50ºC ambient operating temperature, RH 75% max (non-condensing)
Power: 240V AC 50/60 Hz (110V AC voltage available on request)
Dimensions: W 31 x D 46 x H 50 cm, 24kg

To contact Inspection Systems about RDM Test Equipment Laboratory Heat Sealer | HS-2 use Get a quote.