This broad version deburring machine of Q-fin has been designed from the vision “small for small” and “large for large”, which makes it possible to process workpieces up to 1200 mm wide. This deburring machine with the options of vacuum support or magnet support can be used for the following processes on non-ferrous and ferrous metals respectively: deburring, grinding, edge breaking, edge rounding, removal of oxide film. A combination of these processes is also part of the possibilities.
With the unique features that are aligned with each another, Q-fin positions itself in the top segment of the market with the F1200 deburring machine. In many cases, the throughput speed of this machine is 5 times higher than of comparable machines.
Suitable for processing:
• Stainless steel
• Aluminium
• Steel
• Synthetics
Brush system
The brush unit of the F1200 features four counter-rotating brushes. The brushes are adjustable in height, separately from each other. The brush head oscillates in configurable strokes over the width of the machine. This results in a non-directional finish and smooth edge rounding. The speed of the brushes and the speed of the oscillation stroke are freely adjustable. It is possible to attach 2 + 2 different brushes.
This makes Q-fin the only manufacturer that can offer a combination of processes in one passage. The brush is also equipped with a brush-height compensation system developed by Q-fin. This system ensures ease of use, combined with the continuously highest possible production speed and quality.
Operation
Depending on the materials to be processed, you can choose between a vacuum and a magnet system. The convey belt will be adapted to this.
In the standard edition, the first station of the F1200 exists of a grinding head. The abrasive belt removes the burrs and/or incineration points from the product surface. You can decide yourself on the grain size of the abrasive belt, depending on the height and hardness of the burr. If there are no burrs, you can leave the grinding belt switched off.
The second and third station is the so-called brush unit, fitted with four diagonal counter-rotating brushes. This can break the sharp edges of the product and provide them with a large radius.
Abrasive Belt
The abrasive belt of 1200 mm wide is equipped with an oscillation system. This system ensures the abrasive belt to remain stable, and to avoid snake patterns in the material during the grinding. A fine line grain finish is therefore not an issue with this machine. Furthermore, you can even decide whether you want to have a long or a short imprint.
The grinding head features a unique self-supporting construction, making the F1200 the most stable machine on the market. The abrasive belt speed is freely adjustable. The grain size of the abrasive belt, according to preferences, depends on the height and hardness of the burr. Changing an abrasive belt is done in an instant.
Read less...
To contact Sheet Metal Machinery Australia about Q-Fin Deburring Machine | F1200 use Get a quote.
