Pipe Bends & Fittings - Elbow, Tee, Reducer, Cross

Pipe Bends, Fittings - Elbow, Tee, Reducer, Cross

The pipe bend product is manufactured according to SY/5257-2004, ISO15590-1standard and national or industrial standards in petroleum, natural gas, and chemical engineering etc. The pipe fitting products are manufactured according to GB/T13401, GB/T12459, MSS SP-75, ISO15590-1 and other standards, can also be processed according to additional technical requirements of the customers. The pipe fittings comprise tee joints, elbows, and pipe reducers etc.

Specifications 

Product		Specs and parameters
Pipe bends		Pipe bend diameter: DN 219- DN 1524mm
		Bending radius: 3-10m
		Bending angle: ≤90o
		Wall thickness: Max.: 50mm
Pipe fittings	Tee joints (straight tee joints and reduced tee joints)	Tee joint diameter: DN 250- DN 1500mm Bending radius: 3-10mm Wall thickness: 10-120mm
	Elbows	Elbow diameter: DN 250- DN 1500mm Bending radius: 1.5D-3D Bending angle: 45° 90° 180° Wall thickness: 5.0-50mm
	Pipe cap	Pipe cap diameter: DN50- DN1500mm Wall thickness: 2.0-80mm
	Pipe reducers (concentric, eccentric)	Pipe reducer diameter: DN20*15-DN1500*1400 Wall thickness: 5.0-80mm

Application

Pipe bends and pipe fitting products can be used in load-bearing pipelines in such industries as petroleum, natural gas, chemical engineering, electricity, and metallurgy etc., they are the best choices for long-distance transportation pipelines.

Production Line

Integrated with the most advanced technology and automation engineering concept, the bends production line adopts medium frequency induction heating technique, which is the most progressive technical process for bends with large diameter and thick-wall. The products are of high quality, well-shaped appearance, accuracy bending radius and large scope of application. The annual production capacity is around 3000 pieces.

Read more...

To contact IPA Asia Limited about Pipe Bends & Fittings - Elbow, Tee, Reducer, Cross use Get a quote.

The pipe bend product is manufactured according to SY/5257-2004, ISO15590-1standard and national or industrial standards in petroleum, natural gas, and chemical engineering etc. The pipe fitting products are manufactured according to GB/T13401, GB/T12459, MSS SP-75, ISO15590-1 and other standards, can also be processed according to additional technical requirements of the customers. The pipe fittings comprise tee joints, elbows, and pipe reducers etc.

Specifications 

Product		Specs and parameters
Pipe bends		Pipe bend diameter: DN 219- DN 1524mm
		Bending radius: 3-10m
		Bending angle: ≤90o
		Wall thickness: Max.: 50mm
Pipe fittings	Tee joints (straight tee joints and reduced tee joints)	Tee joint diameter: DN 250- DN 1500mm Bending radius: 3-10mm Wall thickness: 10-120mm
	Elbows	Elbow diameter: DN 250- DN 1500mm Bending radius: 1.5D-3D Bending angle: 45° 90° 180° Wall thickness: 5.0-50mm
	Pipe cap	Pipe cap diameter: DN50- DN1500mm Wall thickness: 2.0-80mm
	Pipe reducers (concentric, eccentric)	Pipe reducer diameter: DN20*15-DN1500*1400 Wall thickness: 5.0-80mm

Application

Pipe bends and pipe fitting products can be used in load-bearing pipelines in such industries as petroleum, natural gas, chemical engineering, electricity, and metallurgy etc., they are the best choices for long-distance transportation pipelines.

Production Line

Integrated with the most advanced technology and automation engineering concept, the bends production line adopts medium frequency induction heating technique, which is the most progressive technical process for bends with large diameter and thick-wall. The products are of high quality, well-shaped appearance, accuracy bending radius and large scope of application. The annual production capacity is around 3000 pieces.

Read less...

To contact IPA Asia Limited about Pipe Bends & Fittings - Elbow, Tee, Reducer, Cross use Get a quote.