PIE - Loop Calibrator 334 mA Get latest price

Loop Calibrator 334 mA

In Stock

The PIE 334 is a direct like for like replacement for the superseded Altek 334 loop calibrator, with enhanced accuracy and rugged dependability. Source or read milliamps. Simulate or read the two-wire transmitter. With the 334, performing calibrations on the mA transmitter, recorder, or I/P transducer has never been easier. You'll be able to confirm controller outputs or read the mA signal at any point in the loop. This versatile loop calibrator also boasts an accuracy rating of ±0.025%. A specialised feature of the 334 is a switch for instantly outputting 4 or 20 mA with accuracy to ±0.006 mA. The PIE 334A comes with a 3 year factory warranty, but based on the evidence to date, this little calibrator could still be capable of doing the job well after you've retired!

Product Features: 

• Sources from 0.00 to 24.00 mA / -25.0 to 125.0%
• Reads from 0.00 to 52.00 mA / -25.0 to 300.0%
• Reads from -99.99 to +99.99V DC
• Accuracy of up to 0.03%
• Resolution of 0.01 mA / 10 mV
• Simulates in loops powered from 3 to 100V DC
• Powers and measures 2-wire transmitters to 27V DC
• Drives up to 1200Ω loads
• Instantly outputs at three points from 0.00 to 24.00 mA
• Speed sensitive digital potentiometer
• Fuseless over-voltage protection to 135V AC / DC
• Overload current protection to 25 mA
• Operating temperature range of -20 to +60°C
• Small and lightweight (weighs only 220g)
• 3 Year Warranty

Product Inclusions: Batteries (2 x AA), Test Leads (Attached), Traceable Calibration Certificate and Manual

Read more...

To contact Transtek about PIE Loop Calibrator 334 mA use Get a quote.

The PIE 334 is a direct like for like replacement for the superseded Altek 334 loop calibrator, with enhanced accuracy and rugged dependability. Source or read milliamps. Simulate or read the two-wire transmitter. With the 334, performing calibrations on the mA transmitter, recorder, or I/P transducer has never been easier. You'll be able to confirm controller outputs or read the mA signal at any point in the loop. This versatile loop calibrator also boasts an accuracy rating of ±0.025%. A specialised feature of the 334 is a switch for instantly outputting 4 or 20 mA with accuracy to ±0.006 mA. The PIE 334A comes with a 3 year factory warranty, but based on the evidence to date, this little calibrator could still be capable of doing the job well after you've retired!

Product Features: 

• Sources from 0.00 to 24.00 mA / -25.0 to 125.0%
• Reads from 0.00 to 52.00 mA / -25.0 to 300.0%
• Reads from -99.99 to +99.99V DC
• Accuracy of up to 0.03%
• Resolution of 0.01 mA / 10 mV
• Simulates in loops powered from 3 to 100V DC
• Powers and measures 2-wire transmitters to 27V DC
• Drives up to 1200Ω loads
• Instantly outputs at three points from 0.00 to 24.00 mA
• Speed sensitive digital potentiometer
• Fuseless over-voltage protection to 135V AC / DC
• Overload current protection to 25 mA
• Operating temperature range of -20 to +60°C
• Small and lightweight (weighs only 220g)
• 3 Year Warranty

Product Inclusions: Batteries (2 x AA), Test Leads (Attached), Traceable Calibration Certificate and Manual

Read less...

To contact Transtek about PIE Loop Calibrator 334 mA use Get a quote.