Parking Facilities Limited - Inductive Loop Detectors Get latest price

Inductive Loop Detectors

In Stock

Single channel loop detectors are used to identify the presence of vehicles by means of an inductive loop buried under the road. These “single chip” microprocessor-based units benefit from a detect filter and frequency indicator and are suitable for parking control and motorised door or gate applications all detectors are CE tested and approved.

Key Points

• Single OR Dual Channel
• Standard Size
• Led Diagnostic Lights
• Standard Connection Pins
• Frequency Change
• Easy Dip-Switch Settings
• Different detector strength settings
• Retains settings after power failure
• Power Modes: Theses are available in 24v or 230v
• Powerfail memory (optional) – to retain presence when power is restored.
• Compact size
• Diagnostic capabilities (when used with a DU100)
• Selectable permanent presence (to eliminate premature barrier / gate closure)
• Loop isolation protection
• Loop frequency indication (to eliminate interference with adjacent loops)
• Automatic sensitivity boost (ASB) – for reliable detection of high-bed vehicles (e.g. lorries)
• Detect filter – for screening out unwanted inputs.

To contact Portcullis Australia about Parking Facilities Limited Inductive Loop Detectors use Get a quote.

Single channel loop detectors are used to identify the presence of vehicles by means of an inductive loop buried under the road. These “single chip” microprocessor-based units benefit from a detect filter and frequency indicator and are suitable for parking control and motorised door or gate applications all detectors are CE tested and approved.

Key Points

• Single OR Dual Channel
• Standard Size
• Led Diagnostic Lights
• Standard Connection Pins
• Frequency Change
• Easy Dip-Switch Settings
• Different detector strength settings
• Retains settings after power failure
• Power Modes: Theses are available in 24v or 230v
• Powerfail memory (optional) – to retain presence when power is restored.
• Compact size
• Diagnostic capabilities (when used with a DU100)
• Selectable permanent presence (to eliminate premature barrier / gate closure)
• Loop isolation protection
• Loop frequency indication (to eliminate interference with adjacent loops)
• Automatic sensitivity boost (ASB) – for reliable detection of high-bed vehicles (e.g. lorries)
• Detect filter – for screening out unwanted inputs.

Read less...

To contact Portcullis Australia about Parking Facilities Limited Inductive Loop Detectors use Get a quote.