Parker Domnick Hunter - High Pressure Compressed Air Filter | GH Series Get latest price

High Pressure Compressed Air Filter | GH Series

In Stock

Parker domnick hunter GH series high pressure filters are designed to be ideal for high pressure applications up to 350 bar g. The innovative construction features of the filter housing provide a reliable assembly, as well as simple and safe handling for replacing the filter element. One essential construction feature is the double O-ring seal which protects the housing thread against pollution and humidity and therefore prevents the thread from corrosion. Additionally the second O-ring prevents the filter housing parts from over winding.

By fastening the filter element via its base thread screwed on the tie-rod, this provides the greatest operating safety, even under the pressure pulsations in intermittent operation that are common for high pressure applications.

Highly effective pleated media in four different grades provide an element surface that is four times the size, compared to the conventional wrapped design. The result is a reduced flow speed and efficient separation simultaneously with low pressure drop, thus providing cost reduction during operation with reliable separation performance.

Features

• Optimised flow rates and compact filter housing.
• Improved housing design with double O-ring sealing.
• Threaded rod element fixing.
• Pleated elements.
• Complete filter including filter element and manual drain.
• As an option filters are also available without a drain.
• All filter sizes offer connectors for the installation of calibrated differential pressure gauges.

Sizing and Selection

To ensure quoted air purity specification is met, more than one filtration grade may be required.

Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.

Technical Specifications

• Element Change Interval: 12 months for V, ZP and XP elements / 3 months or max. 1500 hours of operation for A elements
• Filter Efficiency Rating: 99.99% to 99.99999%, depending on filter type
• Residual Oil Content: 0.01 mg/m³ @ 20 °C (XP), 0.5 mg/m³ @ 20 °C (ZP), n.a. (V), 0.003 mg/m³ @ 20 °C (A)
• Max Flow Rate
  • 365 to 4261 (@350 barg) m3/hour
    
  • 214 @ 5076 psig to 2507 @ 5076 psig CFM
• Max Operating Pressure
  • 350 barg
    
  • 5076 psig
• Max Operating Temperature: 176 or 104 for filters with activated carbon elements °F
• Min Operating Temperature
  • 1.5 °C
    
  • 34.7 °F
• Materials of Construction: Housing: Aluminum, anodized / Seals: NBR (G3 - G7), Housing: Steel / Seals: NBR (G9 - G13)
• Weight
  • 2.8, 3.4, 18.2, 21.9, 28.3, 39.2 kg
    
  • 6.17, 7.49, 40.12, 48.28, 62.39, 86.42 lb
• Width
  • 80, 116, 125 mm
    
  • 3.15, 4.56, 4.92 inch
• Height
  • 355, 232, 420, 297, 455, 332, 540, 417, 655, 532, 910, 787 mm
    
  • 13.97, 9.13, 16.53, 11.69, 17.91, 13.07, 21.26, 16.42, 25.78, 20.94, 35.82, 30.98 inch
• Connection Type: BSP-P (DIN ISO 228)
• Micron Rating: 0.01, 1, 3, n.a., depending on filter type μm
• Drain Port Size: G1/4i
• Brand: Parker Domnick Hunter
• Pre-Treatment Requirement: depending on filter type
• Specifications Met: PED Fluid Group II, TR
• Applications: Filtration of compressed air and gaseous Nitrogen

Read more...

To contact Parker Hannifin about Parker Domnick Hunter High Pressure Compressed Air Filter | GH Series use Get a quote.

Parker domnick hunter GH series high pressure filters are designed to be ideal for high pressure applications up to 350 bar g. The innovative construction features of the filter housing provide a reliable assembly, as well as simple and safe handling for replacing the filter element. One essential construction feature is the double O-ring seal which protects the housing thread against pollution and humidity and therefore prevents the thread from corrosion. Additionally the second O-ring prevents the filter housing parts from over winding.

By fastening the filter element via its base thread screwed on the tie-rod, this provides the greatest operating safety, even under the pressure pulsations in intermittent operation that are common for high pressure applications.

Highly effective pleated media in four different grades provide an element surface that is four times the size, compared to the conventional wrapped design. The result is a reduced flow speed and efficient separation simultaneously with low pressure drop, thus providing cost reduction during operation with reliable separation performance.

Features

• Optimised flow rates and compact filter housing.
• Improved housing design with double O-ring sealing.
• Threaded rod element fixing.
• Pleated elements.
• Complete filter including filter element and manual drain.
• As an option filters are also available without a drain.
• All filter sizes offer connectors for the installation of calibrated differential pressure gauges.

Sizing and Selection

To ensure quoted air purity specification is met, more than one filtration grade may be required.

Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.

Technical Specifications

• Element Change Interval: 12 months for V, ZP and XP elements / 3 months or max. 1500 hours of operation for A elements
• Filter Efficiency Rating: 99.99% to 99.99999%, depending on filter type
• Residual Oil Content: 0.01 mg/m³ @ 20 °C (XP), 0.5 mg/m³ @ 20 °C (ZP), n.a. (V), 0.003 mg/m³ @ 20 °C (A)
• Max Flow Rate
  • 365 to 4261 (@350 barg) m3/hour
    
  • 214 @ 5076 psig to 2507 @ 5076 psig CFM
• Max Operating Pressure
  • 350 barg
    
  • 5076 psig
• Max Operating Temperature: 176 or 104 for filters with activated carbon elements °F
• Min Operating Temperature
  • 1.5 °C
    
  • 34.7 °F
• Materials of Construction: Housing: Aluminum, anodized / Seals: NBR (G3 - G7), Housing: Steel / Seals: NBR (G9 - G13)
• Weight
  • 2.8, 3.4, 18.2, 21.9, 28.3, 39.2 kg
    
  • 6.17, 7.49, 40.12, 48.28, 62.39, 86.42 lb
• Width
  • 80, 116, 125 mm
    
  • 3.15, 4.56, 4.92 inch
• Height
  • 355, 232, 420, 297, 455, 332, 540, 417, 655, 532, 910, 787 mm
    
  • 13.97, 9.13, 16.53, 11.69, 17.91, 13.07, 21.26, 16.42, 25.78, 20.94, 35.82, 30.98 inch
• Connection Type: BSP-P (DIN ISO 228)
• Micron Rating: 0.01, 1, 3, n.a., depending on filter type μm
• Drain Port Size: G1/4i
• Brand: Parker Domnick Hunter
• Pre-Treatment Requirement: depending on filter type
• Specifications Met: PED Fluid Group II, TR
• Applications: Filtration of compressed air and gaseous Nitrogen

Read less...

To contact Parker Hannifin about Parker Domnick Hunter High Pressure Compressed Air Filter | GH Series use Get a quote.