OTC Digital Pulse Inverter Welder 400AMP

OTC - Digital Pulse Inverter Welder 400AMP

Digital Pulse Inverter Welder 400AMP

Heavy Industrial MIG Machine - inverter 400 MIG aluminium

In Stock

The OTC DP400 digital inverter has all the functionality of pulse welding, plus the ability to perform digital short arc welding. It comes with full robot compatibility and is extremely useful for semi automatic welding. Take complete control of welding with the most accurate features made possible only through advances available with digital technology, all controlled by a simple to use front panel.

Product Features

Incredible arc stability and welding speeds from very low to high amperage when welding Aluminum, Stainless, Steel, galvanized steel and alloys.
Smaller and lighter 80 kHz IGBT digital Inverter
Four- Roll Encoder Wire Feeder as standard equipment
100 job memory for semi-automatic use
400 amps at 50% duty cycle
Factory optimized pulse waveforms
Pulse welding programs for titanium and inconel
Pulse brazing software for 0.8-1.2mm wire
Adjustable pulse waveform via function key
Synergic or individual control of voltage and wire feed speed
Wave pulse function for TIG like welds in Aluminum
Large 7 segment digital LED numeric display
Function key for advanced programming
Very stable pulse arc as low as 25 amp
Digital turbo start and digital burn back control improves arc starting
3 speed "Fan on demand" IGBT switch circuit
Optional pre-set modes available for a variety of wire alloys
Tool-free dinse twist lock connectors for secondary output
Machine can interface with Daihen Robots

This product comes with:

OTC 3m Mig gun, spare fuses, spare drive rollers and earth leads.

Specifications

Weight: 61KG
Main Voltage: N/A
Welding Current Range: 30 to 400AMPS
Welding Duty Cycle: N/A
Voltage Steps: N/A
Steel & Stainless Wire Size: N/A
Aluminium Wire Size: N/A
OCV: N/A
Dimensions: 250x640x544

To contact Migomag Welding Supplies about OTC Digital Pulse Inverter Welder 400AMP use Get a quote.

Product Features

Incredible arc stability and welding speeds from very low to high amperage when welding Aluminum, Stainless, Steel, galvanized steel and alloys.
Smaller and lighter 80 kHz IGBT digital Inverter
Four- Roll Encoder Wire Feeder as standard equipment
100 job memory for semi-automatic use
400 amps at 50% duty cycle
Factory optimized pulse waveforms
Pulse welding programs for titanium and inconel
Pulse brazing software for 0.8-1.2mm wire
Adjustable pulse waveform via function key
Synergic or individual control of voltage and wire feed speed
Wave pulse function for TIG like welds in Aluminum
Large 7 segment digital LED numeric display
Function key for advanced programming
Very stable pulse arc as low as 25 amp
Digital turbo start and digital burn back control improves arc starting
3 speed "Fan on demand" IGBT switch circuit
Optional pre-set modes available for a variety of wire alloys
Tool-free dinse twist lock connectors for secondary output
Machine can interface with Daihen Robots