NETZSCH N.Mac® Inline Twin Shaft Grinder

NETZSCH - N.Mac® Inline Twin Shaft Grinder

N.Mac® Inline Twin Shaft Grinder

The N.Mac® inline twin shaft grinder crushes fragmenting large and solid particles in liquid media and impresses with its FSIP® concept (Full Service in Place). It is ideal for various applications: wastewater treatment, substrates to food and more.

Easy on-site maintenance.

In Stock

Applications for this product

1 Housing
Housing for pipe installation to protect against pipe blockage and damage to connected equipment.
2 Cutting unit
There are different cutting blocks with special geometry for optimum crushing of the solids. To achieve the desired size reduction result, the different knife configurations with three to eleven teeth can be combined with each other. Knife configuration with seven teeth as standard. The cutting tools are hardened to increase impact resistance and sharpness, so that even the most difficult of contaminants can be shredded reliably.
3 Shaft seal
Mechanical seal with quench and patented bearing and mechanical seal cartridges.
4 Drive
Energy-efficient motors with 2.2 kW, 3 kW or 4 kW are installed as standard. These offer optional control with reversal of direction of rotation for protection in the event of blockages.
5 Inline version
Product inlet and outlet are at the same height. The N.Mac^® can be connected directly into a horizontal pipeline or to a suction connection of a pump rotated 90° to the side.

Why Choose This Product

Protects the system from damage caused by contaminants
Optional cleaning brush for fibrous materials removes material in the gaps between the blades
Cutting devices in the cartridge system
Easy on-site maintenance thanks to innovative FSIP^® design

To contact NETZSCH Australia Pty Ltd about NETZSCH N.Mac® Inline Twin Shaft Grinder use Get a quote.

Applications for this product

1 Housing
Housing for pipe installation to protect against pipe blockage and damage to connected equipment.
2 Cutting unit
There are different cutting blocks with special geometry for optimum crushing of the solids. To achieve the desired size reduction result, the different knife configurations with three to eleven teeth can be combined with each other. Knife configuration with seven teeth as standard. The cutting tools are hardened to increase impact resistance and sharpness, so that even the most difficult of contaminants can be shredded reliably.
3 Shaft seal
Mechanical seal with quench and patented bearing and mechanical seal cartridges.
4 Drive
Energy-efficient motors with 2.2 kW, 3 kW or 4 kW are installed as standard. These offer optional control with reversal of direction of rotation for protection in the event of blockages.
5 Inline version
Product inlet and outlet are at the same height. The N.Mac^® can be connected directly into a horizontal pipeline or to a suction connection of a pump rotated 90° to the side.

Why Choose This Product

Protects the system from damage caused by contaminants
Optional cleaning brush for fibrous materials removes material in the gaps between the blades
Cutting devices in the cartridge system
Easy on-site maintenance thanks to innovative FSIP^® design

To contact NETZSCH Australia Pty Ltd about NETZSCH N.Mac® Inline Twin Shaft Grinder use Get a quote.