Motrona Safety Controller | DS260

Motrona Safety Controller | DS260

The DS260 can achieve up to SIL3/PLe when combined with a SIL3/PLe certified sensor. The speed monitor is equipped with one incremental input (HTL differential, HTL single ended, RS422), a signal distributor and has cable break monitoring.

• SIL3 and PLe certification (depends ofn the used encoder / sensor arrangement)
• Safety functions equivalent to EN 61800-5-2 (SS1, SS2, SOS, SLS, SDl, SSM, SLI, SBC, STO, SMS)
• 1 incremental encoder input with format A, /A, B, /B, Z, /Z
• [HTL differential, HTL single ended, RS422]
• 8 control inputs [HTL / PNP]
• Input frequency up to 500 kHz
• 2 relay outputs 5... 250 VAC / VDC (NO)
• 4 x 2 control outputs with push-pull characteristic, short-circuit-proof,
• Safety related 14 bit analog output for 4 ... 20 mA (scalable)
• Signal splitter
• Power supply 18 ... 30 V
• Sensor Signal, wire break monitoring

Add-on Option: BG200: Plug-in Display Unit
Alternative: DS250: Same performance but up to SIL3/PLe with two independent, non-certified sensors and two incremental encoder Inputs.

To contact Plant Control and Automation about Motrona Safety Controller | DS260 use Get a quote.

The DS260 can achieve up to SIL3/PLe when combined with a SIL3/PLe certified sensor. The speed monitor is equipped with one incremental input (HTL differential, HTL single ended, RS422), a signal distributor and has cable break monitoring.

• SIL3 and PLe certification (depends ofn the used encoder / sensor arrangement)
• Safety functions equivalent to EN 61800-5-2 (SS1, SS2, SOS, SLS, SDl, SSM, SLI, SBC, STO, SMS)
• 1 incremental encoder input with format A, /A, B, /B, Z, /Z
• [HTL differential, HTL single ended, RS422]
• 8 control inputs [HTL / PNP]
• Input frequency up to 500 kHz
• 2 relay outputs 5... 250 VAC / VDC (NO)
• 4 x 2 control outputs with push-pull characteristic, short-circuit-proof,
• Safety related 14 bit analog output for 4 ... 20 mA (scalable)
• Signal splitter
• Power supply 18 ... 30 V
• Sensor Signal, wire break monitoring

Add-on Option: BG200: Plug-in Display Unit
Alternative: DS250: Same performance but up to SIL3/PLe with two independent, non-certified sensors and two incremental encoder Inputs.

Read less...

To contact Plant Control and Automation about Motrona Safety Controller | DS260 use Get a quote.