Mine Foam Sealant by Touch'n Seal is suitable to use for safe sealing or repair of stoppings and overcasts.
Description
1171 Recent ViewsCall for more details
Mine Foam complies as an industry standard for fast, safe sealing or repair of stoppings and overcasts. Offers pre-connected hoses and premium P2 applicator gun.
Touch'n Seal Mine Foam has been tested and evaluated by MSHA to meet or exceed their strict standards for safety and is listed in the "List of Suitable Sealants for Mine Ventilation Controls" (Stoppings & Overcasts).
Formulated for use by the underground mine professonial, Touch 'n Seal Mine Foam is used to control ventilation by sealing air leaks in and around metal, wood and concrete stoppings, overcasts, electrical and plumbing chases, and other areas which may need ventilation control.
It can also be used to control water run-off and leaks, to fill voids and to provide sound and thermal insulation.
The unique formulation allows for quick and complete cure with strong bonding to most surfaces in a wide range of substrate and ambient temperatures. Upright hose assembly, easiest set-up and application
Longest hose reach 11.5 ft- for reduced lifting
Easier to control-meter from low to high output
No special breathing apparatus required
Safe. Isocyanates less than PPB (MSHA-tested)
Heavy duty packaging. Waxed carton, withstands wet environments
Less waste- store up to 90 daysand restart
Quick cure, full 200 board feet yield
Lock "ON" for less operator fatigue, lock "OFF" for safety
ASTM-84 Flame spread 15, smoke developed 110
ASTM E-162: Flame spread index 4
Shelf life: one year
Clear, colour coded hoses
P2 Foam Applicator Gun for Two-Component Foam Kits and Mine Foam
Gun Features
Additional Fan and Conical Spray Nozzles
Reuseable Applicator – Remove nozzle, wipe off o-ring with cloth or paper, and apply petroleum jelly for long-term storage
Trigger safety lock for down-time
Preattached hoses
For more information or a quote on Mine Foam Sealant | Touch'n Seal please call or email.
To contact Pacific Urethanes about Mine Foam Sealant | Touch'n Seal use Get a quote.
Mine Foam complies as an industry standard for fast, safe sealing or repair of stoppings and overcasts. Offers pre-connected hoses and premium P2 applicator gun.
Touch'n Seal Mine Foam has been tested and evaluated by MSHA to meet or exceed their strict standards for safety and is listed in the "List of Suitable Sealants for Mine Ventilation Controls" (Stoppings & Overcasts).
Formulated for use by the underground mine professonial, Touch 'n Seal Mine Foam is used to control ventilation by sealing air leaks in and around metal, wood and concrete stoppings, overcasts, electrical and plumbing chases, and other areas which may need ventilation control.
It can also be used to control water run-off and leaks, to fill voids and to provide sound and thermal insulation.
The unique formulation allows for quick and complete cure with strong bonding to most surfaces in a wide range of substrate and ambient temperatures. Upright hose assembly, easiest set-up and application
Longest hose reach 11.5 ft- for reduced lifting
Easier to control-meter from low to high output
No special breathing apparatus required
Safe. Isocyanates less than PPB (MSHA-tested)
Heavy duty packaging. Waxed carton, withstands wet environments
Less waste- store up to 90 daysand restart
Quick cure, full 200 board feet yield
Lock "ON" for less operator fatigue, lock "OFF" for safety
ASTM-84 Flame spread 15, smoke developed 110
ASTM E-162: Flame spread index 4
Shelf life: one year
Clear, colour coded hoses
P2 Foam Applicator Gun for Two-Component Foam Kits and Mine Foam
Gun Features
Additional Fan and Conical Spray Nozzles
Reuseable Applicator – Remove nozzle, wipe off o-ring with cloth or paper, and apply petroleum jelly for long-term storage
Trigger safety lock for down-time
Preattached hoses
For more information or a quote on Mine Foam Sealant | Touch'n Seal please call or email.