Mil-tek DP250 Drum Press

Mil-tek - DP250 Drum Press

Supplier: Mil-tek Waste Solutions

DP250 Drum Press

The DP250 is a Drum Press capable of compacting steel drums and barrels in less than a minute. With 25 tons of pressing force, even the heaviest of steel drums can be compacted to almost a tenth of their original size.

85% compaction rate

The DP250 Drum Press is designed with ergonomics and safety in mind. Featuring a surrounding spray guard with a large viewing window, users can safely and conveniently operate the machine.With a floorspace footprint of just over 1m², the DP250 is designed for installation at the point where drums are used, allowing for an integrated waste creation and compaction process.Three venting spikes pierce holes in the drum top for ventilation during the pressing cycle and the strong-chromed piston presses down with 25 tons of pressing force. The full pressing cycle lasts just 48 seconds, meaning that drums and barrels can be continuously loaded and compacted at a steady and regular rate. Boasting electrical and hydraulic overload protection, the state of the art controls are integrated into the machine to ensure safe usage, maximum convenience and long lasting protection against damage. The DP250 Drum Press also features a collection drain allowing excess fluid to safely run off.

Product Features:

85% compaction rate
25 tons of pressing force
Surrounding spray guard
Quiet two-stage hydraulics
Automated compaction cycle
Collection drain for excess fluid
Electrical and hydraulic overload protection

Product Specifications:

Machine size
Height (mm)	2400 (2920)
Width (mm)	1231
Depth (mm)	850
Weight	730 kg
Capacity	Drums: Up to 200L (ø600)
Bale size
Bale weight	<200 L
Door Opening
Height (mm)	1200
Width (mm)	680
Depth (mm)	800
Power	400/50 V/Hz
Pressure	Up to 25 tons

To contact Mil-tek Waste Solutions about Mil-tek DP250 Drum Press use Get a quote.

Product Features:

85% compaction rate
25 tons of pressing force
Surrounding spray guard
Quiet two-stage hydraulics
Automated compaction cycle
Collection drain for excess fluid
Electrical and hydraulic overload protection

Product Specifications:

Machine size
Height (mm)	2400 (2920)
Width (mm)	1231
Depth (mm)	850
Weight	730 kg
Capacity	Drums: Up to 200L (ø600)
Bale size
Bale weight	<200 L
Door Opening
Height (mm)	1200
Width (mm)	680
Depth (mm)	800
Power	400/50 V/Hz
Pressure	Up to 25 tons

Read less...

To contact Mil-tek Waste Solutions about Mil-tek DP250 Drum Press use Get a quote.

DP250 Drum Press(1.81MB)

Let Mil-tek Waste Solutions provide you with a quote

Supplier

Get a quote

Supplier: Mil-tek Waste Solutions

Distribution: NSW, QLD, VIC, WA, SA, NT and TAS

Location: Tuggerah, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Mil-tek Waste Solutions are also proudly displaying these credentials:

Established:

1992

Employees:

6-20

Memberships:

WCRA

Certifications:

AS/NZD 4024.3703.2020

Distribution:

NSW, QLD, VIC, WA, SA, NT and TAS

Location:

Tuggerah , NSW