Maskell Acidic Air & Fume Scrubber I ...

Maskell - Acidic Air & Fume Scrubber I Venturi 720 Series

Acidic Air & Fume Scrubber I Venturi 720 Series

Maskell Productions 720 Venturi Scrubbers remove fumes, dust, solids and/or liquid particulate ranging in size down to 0.1 micron.

16 Recent Views In Stock

Typical applications include - fertiliser and chemical plants, pulp and paper mills and smelting, galvanising and plating operations.

Pollutants are removed by bringing the gas stream and scrubbing liquid into violent turbulent contact as they pass through a high velocity venturi throat section. The entrained droplets are particulates agglomerate in the diverging section and are removed in the lower sump and tangent cyclone separator.

Cleaned gas exits the cyclone vertically and the recovered liquid is returned to the sump for recycle. 720 Scrubbers feature large orifice non-clogging spray nozzles for uniform wetting of high solids concentration or large particles. Units tend to be self-cleaning and have no moving internal components to wear. Throat sections are removable and an exterior recirculation system is available for maintenance case. Sizes range from 2’ thru 12’ diameters with capacities up to 67,000 cfm per unit.

Key Features:

Low maintenance cost: No moving internal parts to wear. Large spray nozzles are used on the scrubbers to provide uniform distribution of liquid into the in-coming gas stream. The spray nozzles have large orifices and are designed to be non-clogging. They are strategically located such that they can be removed for inspection and/or replacement without having to shut down the equipment.
High efficiency: Proper sizing and selection of pressure drop will result in efficiencies exceeding 99% for particles ranging in size down to 0.1 micron. Since the throat section is made removable, new inserts can be provided to either increase or decrease the pressure drop to meet changing gas stream conditions.
Low initial cost: standard designs are available in capacities from 3,000 m3 /hr to 114,000 m3 /hr .
Extended service life: Individual units are designed with maximum corrosion resistance as a primary consideration. The wide selection of corrosion resistant materials feature FRP (fibreglass reinforced plastic) as a standard material with stainless steel and other alloy construction available.

To contact Maskell Australia about Maskell Acidic Air & Fume Scrubber I Venturi 720 Series use Get a quote.

Key Features:

Low maintenance cost: No moving internal parts to wear. Large spray nozzles are used on the scrubbers to provide uniform distribution of liquid into the in-coming gas stream. The spray nozzles have large orifices and are designed to be non-clogging. They are strategically located such that they can be removed for inspection and/or replacement without having to shut down the equipment.
High efficiency: Proper sizing and selection of pressure drop will result in efficiencies exceeding 99% for particles ranging in size down to 0.1 micron. Since the throat section is made removable, new inserts can be provided to either increase or decrease the pressure drop to meet changing gas stream conditions.
Low initial cost: standard designs are available in capacities from 3,000 m3 /hr to 114,000 m3 /hr .
Extended service life: Individual units are designed with maximum corrosion resistance as a primary consideration. The wide selection of corrosion resistant materials feature FRP (fibreglass reinforced plastic) as a standard material with stainless steel and other alloy construction available.

Read less...

To contact Maskell Australia about Maskell Acidic Air & Fume Scrubber I Venturi 720 Series use Get a quote.