Maric | Wafer Type Flow Control Valves | Stainless Steel 316 Get latest price

Maric | Wafer Type Flow Control Valves | Stainless Steel 316

33 Recent Views Call for more details

Features:

• Materials: 316 Stainless Steel to ASTM484/A276 - Nitrile, potable water approved to AS4020 or EPDM or Viton if applicable
• Flange Specification: Suits ANSI flanges (ASME/ANSI B16.5) Alternative specs are available - Refer to Valve Selection Guide. Standard Wafers are not full flange type i.e. flange bolts locate wafer concentrically and remain visible when viewing assembly. Wafers are fitted with an o’ring in each face for sealing against smooth flat faced flanges. Gaskets will however be required where grooved, raised or rough cast face flanges are used. PVC and Poly Stub Flanges note; Due to smaller I.D. of these flanges/pipes, optional spacers are often required to prevent restriction.
• Max Pressure Differential: 12000 kPa (for N7 & E7 rubbers Only)
• Max Hydrostatic Pressure: 6000 kPa
• Max Temperature: 60C for Nitrile control rubbers - 100C for EPDM - 200C for Viton
• Compatible Control Rubbers: Standard Precision P (Non Standard LP, N6, N7, EP, E7, V, HF)

To contact Maric Flow Control Australia about Maric | Wafer Type Flow Control Valves | Stainless Steel 316 use Get a quote.

Features:

• Materials: 316 Stainless Steel to ASTM484/A276 - Nitrile, potable water approved to AS4020 or EPDM or Viton if applicable
• Flange Specification: Suits ANSI flanges (ASME/ANSI B16.5) Alternative specs are available - Refer to Valve Selection Guide. Standard Wafers are not full flange type i.e. flange bolts locate wafer concentrically and remain visible when viewing assembly. Wafers are fitted with an o’ring in each face for sealing against smooth flat faced flanges. Gaskets will however be required where grooved, raised or rough cast face flanges are used. PVC and Poly Stub Flanges note; Due to smaller I.D. of these flanges/pipes, optional spacers are often required to prevent restriction.
• Max Pressure Differential: 12000 kPa (for N7 & E7 rubbers Only)
• Max Hydrostatic Pressure: 6000 kPa
• Max Temperature: 60C for Nitrile control rubbers - 100C for EPDM - 200C for Viton
• Compatible Control Rubbers: Standard Precision P (Non Standard LP, N6, N7, EP, E7, V, HF)

Read less...

To contact Maric Flow Control Australia about Maric | Wafer Type Flow Control Valves | Stainless Steel 316 use Get a quote.