Kleentek - Ultrasonic Chemical Solution - FX Degreaser Get latest price

It dissolves grease and soil build-up on any surface with minimum effort. FX Degreaser decarbonises and de-fats in one operation.

FX Degreaser is a powerful synergist blend of surfactants ensuring fast penetration and thorough rinsing which boosts the removal of grease and soil removal from any surface with minimum effort or heat without leaving a film. The formula provides FX Degreaser with the strength to remove burnt on soil and grease deposits from alloys, cast iron, steel, stainless steel, glass, enamel and ceramic surfaces.

FX Degreaser is AQIS approved as a Category 1 General Purpose Cleaner type A (Food Grade). It is non-toxic, non-flammable, non-solvent and readily biodegradable, leaves no odours and has no fumes.

Directions for use:

• FX Degreaser is used diluted at a concentration of 1 part by volume product to 10 parts by volume water, e.g. 100mL to 1 Litre)
• The operating temperature is 40 - 60°C for ultrasonic tanks. Parts and components should be thoroughly rinsed with water before drying.
• The use of a dewatering protective product such as Ant-Rust,  will prevent the clean components from flash rusting following cleaning.

FX Degreaser is available in 5 litre and 25 litre containers.

To contact Kleentek Australia about Kleentek Ultrasonic Chemical Solution - FX Degreaser use Get a quote.

It dissolves grease and soil build-up on any surface with minimum effort. FX Degreaser decarbonises and de-fats in one operation.

FX Degreaser is a powerful synergist blend of surfactants ensuring fast penetration and thorough rinsing which boosts the removal of grease and soil removal from any surface with minimum effort or heat without leaving a film. The formula provides FX Degreaser with the strength to remove burnt on soil and grease deposits from alloys, cast iron, steel, stainless steel, glass, enamel and ceramic surfaces.

FX Degreaser is AQIS approved as a Category 1 General Purpose Cleaner type A (Food Grade). It is non-toxic, non-flammable, non-solvent and readily biodegradable, leaves no odours and has no fumes.

Directions for use:

• FX Degreaser is used diluted at a concentration of 1 part by volume product to 10 parts by volume water, e.g. 100mL to 1 Litre)
• The operating temperature is 40 - 60°C for ultrasonic tanks. Parts and components should be thoroughly rinsed with water before drying.
• The use of a dewatering protective product such as Ant-Rust,  will prevent the clean components from flash rusting following cleaning.

FX Degreaser is available in 5 litre and 25 litre containers.

Read less...

To contact Kleentek Australia about Kleentek Ultrasonic Chemical Solution - FX Degreaser use Get a quote.