DME - Injection Process Controller | IPC-01-01 Get latest price

Injection Process Controller | IPC-01-01

In Stock

Peak pressure control is accomplished using a mould pressure sensor and a single set point to control filling and packing of the mould. By closely monitoring and controlling cavity pressure the user will reduce cycle time, reject rates and plastics usage. The controller operates the booster pump for the absolute minimum time required to fill and pack the cavities, significantly reducing electrical power consumption.

To contact Die Mould Equipment about DME Injection Process Controller | IPC-01-01 use Get a quote.

Peak pressure control is accomplished using a mould pressure sensor and a single set point to control filling and packing of the mould. By closely monitoring and controlling cavity pressure the user will reduce cycle time, reject rates and plastics usage. The controller operates the booster pump for the absolute minimum time required to fill and pack the cavities, significantly reducing electrical power consumption.

Read less...

To contact Die Mould Equipment about DME Injection Process Controller | IPC-01-01 use Get a quote.

Brochure(0.08MB)