High Productivity Soffit System | Airodek

High Productivity Soffit System | Airodek

High Productivity Soffit System | Airodek

High Productivity Soffit System | Airodek

The Airodek system of lightweight aluminium panels and adjustable props means 30% less weight and 40% fewer parts than conventional steel props and timber, and 25% less weight than other systems using primary beams and panels. All of which saves time, labour and cost.

Faster

• Light and easy to handle
• Quick to disassemble, speeding cycle times and reducing costs
• Easy to assemble
• Very few connecting parts

Easier

• Full range of accessories makes this a very versatile soffit support system, including composite panels for longer life and a better finish
• Powder coated aluminium frames reduce concrete adhesion making maintenance on site easier
• Can be used with props, decking or customer's own shoring systems
• Airodek has either a high quality ply face or a composite face, which lasts longer, provides a better finish and is easier to clean

Safer

• Can be erected from below the soffit level reducing working at height
• Unique crown component secures panels in place at the corners creating a secure connection and making the system fast to use
• Neatly stacks into stillages for safe transportation

Applications & Options

Airodek is a lightweight soffit formwork system which has been designed for easy assembly, transportation, storage and maintenance. It comes in 3 variants.

Application

• Soffit formwork - suitable for a range of concrete slabs up to 700mm thick depending on the panels used.

Variant 1 Props & Panels

• The panels are supported by the crowns and props. The whole system is struck once the concrete has gained sufficient strength.

Variant 2 Panels, Deck Beams, Drop Heads and Shoring

• A quick strip system, where the panels and deck beams are removed during the early stages of curing, whilst the dropheads and shoring remain undisturbed to support the concrete.

Variant 3 - Skeletal System

• The deck beams sit in the drophead and the Airodek soffit beam spans between the deck beams supporting the plywood. The deck beams and soffit beams can be struck and removed, leaving the plywood supported by the dropheads and shoring.

Features & Benefits

Innovative Design

Airodek is based on a single principle - simplicity. Airodek has been designed for easy assembly, transportation, storage and maintenance.

• Lightweight
  • A single operator can easily and safely handle all the equipment reducing labour times for erection and dismantling.

• Erected from below the soffit
  • Panels and beams can be erected from below the soffit reducing working at height issues, up to 4.2m in height.

• Ply or Composite Face
  • Airodek has either a high quality ply face or a composite face, which lasts up to 20 times longer, provides a significantly better finish which is Class 2 and is much easier to clean and maintain. The composite panels also have flush countersunk rivets and neatley sealed sheet edges.

• Quick Strike pin
  • Standard props have a quick strike pin which releases the load with a single hammer blow.

• Useful Accessories
  • Spacing gates and legs provide stability and give props the correct spacing.

• Unique Crown
  • The unique crown securely locates the corners of up to four panels simultaneously ensuring panels cannot easily be dislodged.

• Safety Upstands
  • Plastic upstands on decking beams provide secure location points and prevent the unintentional dislodging of panels.

Innovative Components

• Drophead
  • The quick strike system lowers the decking beams by 70mm to enable the panels to be removed and re-used whilst leaving the concrete propped.

• Lightweight
  • All components in the prop and panel system are under 25kg making them easy for man handling.

• Easy handling
  • The largest panel has twin grab handles to facilitate easy handling.

• Composite form-face
  • Composite panels provide a Class 2 finish, they can also be used up to 20 more times than ply forms and they are much easier to clean and repair, saving significantly on replacement and maintenance costs.

• 2 sizes of Infill beams
  • Neatly removes the necessity for additional timber support to the plywood used at infill positions.

• Base jack
  • Drophead, perimeter U-head and crown are all designed to support the decking beams without differing adjustments to height of the jack at the base.

 

Read more...

To contact RMD Australia about High Productivity Soffit System | Airodek use Get a quote.

The Airodek system of lightweight aluminium panels and adjustable props means 30% less weight and 40% fewer parts than conventional steel props and timber, and 25% less weight than other systems using primary beams and panels. All of which saves time, labour and cost.

Faster

• Light and easy to handle
• Quick to disassemble, speeding cycle times and reducing costs
• Easy to assemble
• Very few connecting parts

Easier

• Full range of accessories makes this a very versatile soffit support system, including composite panels for longer life and a better finish
• Powder coated aluminium frames reduce concrete adhesion making maintenance on site easier
• Can be used with props, decking or customer's own shoring systems
• Airodek has either a high quality ply face or a composite face, which lasts longer, provides a better finish and is easier to clean

Safer

• Can be erected from below the soffit level reducing working at height
• Unique crown component secures panels in place at the corners creating a secure connection and making the system fast to use
• Neatly stacks into stillages for safe transportation

Applications & Options

Airodek is a lightweight soffit formwork system which has been designed for easy assembly, transportation, storage and maintenance. It comes in 3 variants.

Application

• Soffit formwork - suitable for a range of concrete slabs up to 700mm thick depending on the panels used.

Variant 1 Props & Panels

• The panels are supported by the crowns and props. The whole system is struck once the concrete has gained sufficient strength.

Variant 2 Panels, Deck Beams, Drop Heads and Shoring

• A quick strip system, where the panels and deck beams are removed during the early stages of curing, whilst the dropheads and shoring remain undisturbed to support the concrete.

Variant 3 - Skeletal System

• The deck beams sit in the drophead and the Airodek soffit beam spans between the deck beams supporting the plywood. The deck beams and soffit beams can be struck and removed, leaving the plywood supported by the dropheads and shoring.

Features & Benefits

Innovative Design

Airodek is based on a single principle - simplicity. Airodek has been designed for easy assembly, transportation, storage and maintenance.

• Lightweight
  • A single operator can easily and safely handle all the equipment reducing labour times for erection and dismantling.

• Erected from below the soffit
  • Panels and beams can be erected from below the soffit reducing working at height issues, up to 4.2m in height.

• Ply or Composite Face
  • Airodek has either a high quality ply face or a composite face, which lasts up to 20 times longer, provides a significantly better finish which is Class 2 and is much easier to clean and maintain. The composite panels also have flush countersunk rivets and neatley sealed sheet edges.

• Quick Strike pin
  • Standard props have a quick strike pin which releases the load with a single hammer blow.

• Useful Accessories
  • Spacing gates and legs provide stability and give props the correct spacing.

• Unique Crown
  • The unique crown securely locates the corners of up to four panels simultaneously ensuring panels cannot easily be dislodged.

• Safety Upstands
  • Plastic upstands on decking beams provide secure location points and prevent the unintentional dislodging of panels.

Innovative Components

• Drophead
  • The quick strike system lowers the decking beams by 70mm to enable the panels to be removed and re-used whilst leaving the concrete propped.

• Lightweight
  • All components in the prop and panel system are under 25kg making them easy for man handling.

• Easy handling
  • The largest panel has twin grab handles to facilitate easy handling.

• Composite form-face
  • Composite panels provide a Class 2 finish, they can also be used up to 20 more times than ply forms and they are much easier to clean and repair, saving significantly on replacement and maintenance costs.

• 2 sizes of Infill beams
  • Neatly removes the necessity for additional timber support to the plywood used at infill positions.

• Base jack
  • Drophead, perimeter U-head and crown are all designed to support the decking beams without differing adjustments to height of the jack at the base.

 

Read less...

To contact RMD Australia about High Productivity Soffit System | Airodek use Get a quote.