Novatech Controls - Gas Analyser | Combustion | Flue Gas | 1732 Get latest price

Gas Analyser | Combustion | Flue Gas | 1732

Gas Analyser | Combustion | Flue Gas | 1732

Industry Proven over 30 years

In Stock

The Novatech 1732 Oxygen Transmitter is designed to measure oxygen concentration in a range of combustion applications such as power stations and industrial boilers. The measurement is used to control the air / fuel ration in the burner to maintain efficiency and safe operation conditions.

Optimum combustion reduces your fuel bill and helps the whole world and future generations by reducing harmful greenhouse gas emissions. The current high cost of fuel has helped to reduce the payback period for the cost of installing oxygen monitoring and air / fuel ratio control.

The transmitter is designed to be used along with the range of Novatech heated and unheated oxygen probes. These probes use a zirconia sensor operating in environments up to 1400° (2010°F). The 1231 oxygen probe has an integrated heater, while the 1232 probe uses the process heat to heat the sensor. There is a unique cable connection between the 1732 transmitter and the 1231/1232/1234 probe.

It makes sense to consider the benefits of installing an oxygen system on your combustion process. The 1732 Oxygen Transmitter is suitable for gaseous oxygen measurements in a variety of processes.

 

Features of this product

• Inputs
  -Two zirconia oxygen probes, heated or unheated
  -Oxygen range from 10-30 to 100%
  -Furnace, kiln or flue thermocouple, field selectable as type K, J, R or S
  -Main flame established safety interlock (for heated probes only)
  -Purge pressure or flow switch
• Outputs
  -Two linearized 4-20mA or 0-20mA DC isolated outputs, max. load 1000?
  -The output function and the range are field selectable
  -Common alarm relay
  -Three other alarm relays with selectable functions
• Digital Interface
  -RS-232 or two-wire RS-485 MODBUS(TM) for connection to a computer/DCS/PCL for monitoring of the
  transmitter, probe or combustion process.
• Display
  -Multi font graphical display
  -Large font characters for the oxygen on the top line
  -Selectable lower line items for the secondary display functions. i.e. Probe temperature, Oxygen second
  probe
  -Alarm display mode that shows the time of the alarm, the acceptance time and the time that the alarm was
  cleared of up to 4000 alarm events

Why choose the 1732 

• Combustion optimisation
• Dual probe capability allowing for redundancy and zero downtime in the event of a probe failure
• Keeping the level of pollution and greenhouse gases emitted from the appliance to a minimum as a result of efficient combustion.
• Capable of measuring oxygen concentration in gas with temperatures from ambient to 1400(c) (2550F)
• Designed with flexibility and intergration as its key features
• A versatile instrument that can be tailored to a wide range of applications

Applications for this product

Boilers

• Power generation
• Package
• Black liquor recovery

Iron & steel

• Heating furnaces
• Coke ovens
• Soaking pits

Aluminium

• Potlines
• Holding furnaces

Incinerators

• PVC
• Medical waste
• Toxic waste

Kilns & furnaces

• Rotary lime
• Cement
• Glass
• Ceramic
• Brick

Nitrogen purity

• Generator

O2 enrichment

• Generator

Food packaging

• Continuous monitoring

 

Specifications

• Transmitter Specifications

Number of Oxygen Probes: 1 or 2
Oxygen Range: 1 x 10^-30 to 100%
Oxygen Accuracy: ±1% of actual measured oxygen value with a repeatability of ±0.5% of the
measured value
Thermocouple Types: Type K and J
Temperature Accuracy: ±2?C
Analog Outputs: 0-20mA or 4-20mA field selectable
Active Outputs

Output Load: 1000 ohm max
Alarm Relays: 4
Alarm Relay Contacts: 2A 240VAC, 2A 30VDC, Reinforced insulation when used with mains voltage

Mains Voltage Supply: 100 to 240VAC 50/60 Hz Reinforced insulation
Overvoltage: Category II (IEC60364-4-443)
Power: 5 Watts for controller plus probe power, 530W max., 25% duty cycle each probe on 240VAC
110W max., 100% duty cycle each probe on 110VAC, 576W (2.4A) max
Environmental Rating: Operating Temperature -25°C to 55°C , Relative Humidity 5% to 95% (non-condensing)
Altitude: 2000m Maximum
Degree of Protection: IP65 , IP54 with internal reference air pump
Case Size: 315mm (12.4”) wide, 190mm (7.5”) high, 110mm (4.3”) deep
Case Weight: 3.3 Kg (7.3 lbs.)

Read more...

To contact Intelligent Systems Pty Ltd about Novatech Controls Gas Analyser | Combustion | Flue Gas | 1732 use Get a quote.

The Novatech 1732 Oxygen Transmitter is designed to measure oxygen concentration in a range of combustion applications such as power stations and industrial boilers. The measurement is used to control the air / fuel ration in the burner to maintain efficiency and safe operation conditions.

Optimum combustion reduces your fuel bill and helps the whole world and future generations by reducing harmful greenhouse gas emissions. The current high cost of fuel has helped to reduce the payback period for the cost of installing oxygen monitoring and air / fuel ratio control.

The transmitter is designed to be used along with the range of Novatech heated and unheated oxygen probes. These probes use a zirconia sensor operating in environments up to 1400° (2010°F). The 1231 oxygen probe has an integrated heater, while the 1232 probe uses the process heat to heat the sensor. There is a unique cable connection between the 1732 transmitter and the 1231/1232/1234 probe.

It makes sense to consider the benefits of installing an oxygen system on your combustion process. The 1732 Oxygen Transmitter is suitable for gaseous oxygen measurements in a variety of processes.

 

Features of this product

• Inputs
  -Two zirconia oxygen probes, heated or unheated
  -Oxygen range from 10-30 to 100%
  -Furnace, kiln or flue thermocouple, field selectable as type K, J, R or S
  -Main flame established safety interlock (for heated probes only)
  -Purge pressure or flow switch
• Outputs
  -Two linearized 4-20mA or 0-20mA DC isolated outputs, max. load 1000?
  -The output function and the range are field selectable
  -Common alarm relay
  -Three other alarm relays with selectable functions
• Digital Interface
  -RS-232 or two-wire RS-485 MODBUS(TM) for connection to a computer/DCS/PCL for monitoring of the
  transmitter, probe or combustion process.
• Display
  -Multi font graphical display
  -Large font characters for the oxygen on the top line
  -Selectable lower line items for the secondary display functions. i.e. Probe temperature, Oxygen second
  probe
  -Alarm display mode that shows the time of the alarm, the acceptance time and the time that the alarm was
  cleared of up to 4000 alarm events

Why choose the 1732 

• Combustion optimisation
• Dual probe capability allowing for redundancy and zero downtime in the event of a probe failure
• Keeping the level of pollution and greenhouse gases emitted from the appliance to a minimum as a result of efficient combustion.
• Capable of measuring oxygen concentration in gas with temperatures from ambient to 1400(c) (2550F)
• Designed with flexibility and intergration as its key features
• A versatile instrument that can be tailored to a wide range of applications

Applications for this product

Boilers

• Power generation
• Package
• Black liquor recovery

Iron & steel

• Heating furnaces
• Coke ovens
• Soaking pits

Aluminium

• Potlines
• Holding furnaces

Incinerators

• PVC
• Medical waste
• Toxic waste

Kilns & furnaces

• Rotary lime
• Cement
• Glass
• Ceramic
• Brick

Nitrogen purity

• Generator

O2 enrichment

• Generator

Food packaging

• Continuous monitoring

 

Specifications

• Transmitter Specifications

Number of Oxygen Probes: 1 or 2
Oxygen Range: 1 x 10^-30 to 100%
Oxygen Accuracy: ±1% of actual measured oxygen value with a repeatability of ±0.5% of the
measured value
Thermocouple Types: Type K and J
Temperature Accuracy: ±2?C
Analog Outputs: 0-20mA or 4-20mA field selectable
Active Outputs

Output Load: 1000 ohm max
Alarm Relays: 4
Alarm Relay Contacts: 2A 240VAC, 2A 30VDC, Reinforced insulation when used with mains voltage

Mains Voltage Supply: 100 to 240VAC 50/60 Hz Reinforced insulation
Overvoltage: Category II (IEC60364-4-443)
Power: 5 Watts for controller plus probe power, 530W max., 25% duty cycle each probe on 240VAC
110W max., 100% duty cycle each probe on 110VAC, 576W (2.4A) max
Environmental Rating: Operating Temperature -25°C to 55°C , Relative Humidity 5% to 95% (non-condensing)
Altitude: 2000m Maximum
Degree of Protection: IP65 , IP54 with internal reference air pump
Case Size: 315mm (12.4”) wide, 190mm (7.5”) high, 110mm (4.3”) deep
Case Weight: 3.3 Kg (7.3 lbs.)

Read less...

To contact Intelligent Systems Pty Ltd about Novatech Controls Gas Analyser | Combustion | Flue Gas | 1732 use Get a quote.

1732(0.34MB)

1732-Operators-Manual(0.97MB)

1732-Technical-Manual(1.98MB)