Testo - Diesel Engine Emissions/ Gas Analyser | 340

Diesel Engine Emissions/ Gas Analyser | 340

Increasing efficiency and minimizing fuel use are necessary to compete in today's market. The Testo 340 diesel engine analyser provides the information to understand your process, enabling you to make informed combustion decisions. It is the ideal tool to identify any emission problems.

Features

• 4-gas choice of | O₂ | CO | CO_low | NO | NO_low| NO₂ | SO2 |  
• Field-replaceable pre-calibrated sensors means zero downtime 
• 18 fuels to choose from, plus 10 user-defined fuels (input from EasyEmissions Software)
• Automatic Sensor Protections keeps your analyzer working longer
• Integrated pressure sensor measures draft or differential pressure and simultaneously measure exhaust gas and flow velocity for flow

Low Cost Engine Tuning

Some combustion sources run normally high concentrations while others are high because of inadequate control or flawed set-up. High concentrations can reduce the normal life span of sensors. Testo's solution is replaceable interference filters on the CO and NO sensors. Analyzer diagnostics will display the filter lifetime in ppm hours to inform you of filter change-out which is easy and quick to replace. This simple process increases accuracy and extends sensor lifetime.
Testo has a complete line of products to assist in testing the exhaust gas of each diesel powered unit. The testo 340 four-gas analyzer is perfect identifying concentrations of O2, CO, NO, NO2 and SO2

Run your own Diagnostics

The ( i ) button on the Testo 340 Diesel engine analyser lets to run your own instrument diagnostic with a touch of a button. Once you press the button you will be taken into the diagnostic screen on the Testo 340 which will allow you to see the instrument status.

• Once your on the instrument diagnostic mode you can
• Perform an automated quick leak check before your test.
• View the battery status (lasts approximately 6 hours with pump on)
• Review the pump flow rate (liters/min)
• Display error status with description and diagnosis and last service/maintenance date
• Graphic representation of sensor calibration data
• Shows status of condensate trap

 

Read more...

To contact HK Calibration Technologies about Testo Diesel Engine Emissions/ Gas Analyser | 340 use Get a quote.

Increasing efficiency and minimizing fuel use are necessary to compete in today's market. The Testo 340 diesel engine analyser provides the information to understand your process, enabling you to make informed combustion decisions. It is the ideal tool to identify any emission problems.

Features

• 4-gas choice of | O₂ | CO | CO_low | NO | NO_low| NO₂ | SO2 |  
• Field-replaceable pre-calibrated sensors means zero downtime 
• 18 fuels to choose from, plus 10 user-defined fuels (input from EasyEmissions Software)
• Automatic Sensor Protections keeps your analyzer working longer
• Integrated pressure sensor measures draft or differential pressure and simultaneously measure exhaust gas and flow velocity for flow

Low Cost Engine Tuning

Some combustion sources run normally high concentrations while others are high because of inadequate control or flawed set-up. High concentrations can reduce the normal life span of sensors. Testo's solution is replaceable interference filters on the CO and NO sensors. Analyzer diagnostics will display the filter lifetime in ppm hours to inform you of filter change-out which is easy and quick to replace. This simple process increases accuracy and extends sensor lifetime.
Testo has a complete line of products to assist in testing the exhaust gas of each diesel powered unit. The testo 340 four-gas analyzer is perfect identifying concentrations of O2, CO, NO, NO2 and SO2

Run your own Diagnostics

The ( i ) button on the Testo 340 Diesel engine analyser lets to run your own instrument diagnostic with a touch of a button. Once you press the button you will be taken into the diagnostic screen on the Testo 340 which will allow you to see the instrument status.

• Once your on the instrument diagnostic mode you can
• Perform an automated quick leak check before your test.
• View the battery status (lasts approximately 6 hours with pump on)
• Review the pump flow rate (liters/min)
• Display error status with description and diagnosis and last service/maintenance date
• Graphic representation of sensor calibration data
• Shows status of condensate trap

 

Read less...

To contact HK Calibration Technologies about Testo Diesel Engine Emissions/ Gas Analyser | 340 use Get a quote.