Fibersystem - Fiber Optical Converter C37.94 – E1 G.703 SyncE Get latest price

Fiber Optical Converter C37.94 – E1 G.703 SyncE

27 Recent Views In Stock

Fibersystem substation products is built for demanding environments and can stand 4kV peaks. Adapters are available for other type of connections, e.g. BNC.

• IEEE C37.94 and E1 G.703 connection over Synchronous Ethernet
• Both channels are transparently converted into UDP packets and back
• Web interface monitor/management, enables:
  • Configuration/set-up
  • Event monitoring
  • Monitor alarm
  • Firmware upgrade
  • Filtering of unauthorized traffic
• New security functions:
  • Optional extra removable power supply for redundancy
  • Optional encryption of traffic
  • Tampering proof casing
• C37.94 and E1 channel is transparent to protocols and signalling – All data channels transferred
• Selectable clock synchronisation with SyncE network, E1 input, C37.94 input or a clock feed from a reference
• Low latency
• Standards compliant for power substation installation
• 19” rack mounting with only 227mm depth

 

TECHNICAL DATA

Fiber Optical C37.94 link

• Data speed 2048kbps
• Protocol IEEE C37.94
• Fiber Multi Mode 850nm 50/125um or 62.5/125um, LC-connector (ruggedized) Other fiber optical components available as option
• Optical system budget 13dB in 62.5/um. 9dB in 50/125um fiber
• Typical distance 0 – 2km (3dB system margin for 50/125um and 6dB for 62.5/125um)

Galvanic E1 link

• Data speed 2048kbps
• Protocol G.703, E1
• Connector 120 ohm, RJ45 (BNC connector available)

Galvanic Synchronous Ethernet link

• Data speed 1000 BaseT
• Protocol SyncE according to ITU-T (G.8261, G.8262, G.8264) standardized network with transference of clock signals over Ethernet physical layer
• Connector RJ45 cat 6
• Prerequisites Each network element along a synchronization path must support SyncE

Clock input/output

• Clock frequency out Selectable
• Clock frequency in Selectable
• Connector SMA

Power Supply

• DC 36-75VDC
• AC 85-264VAC, 50−60 Ηz or 120-370VDC.
• AC-connector IEC 320, 3pin, locking IEC

Environmental

• Operating temperature range 25 to +55°C
• Storage temperature range 40 to +85°C
• Relative humidity operating 5 to 95 %
• Relative humidity storage 5 to 95 % non-condensing

CE compliance

• Immunity EN 61000-6-2
• Emission EN 61000-6-4
• LVD EN 50178; RIV = 250 V OVC = III

EMC compliance

• ESD IEC 60255-22-2 Class 3, contact 6kV, air 8kV
• Radiated IEC 60255-22-3 / IEEE/ANSI C37.90.2; 35V/m
• Burst Power IEC 60255-22-1 Class III
• Burst Communication IEC 60255-22-1 Class II; 0,5 kV diff; 1 kV common mode
• Fast transient Power IEC 60255-22-4 Class IV
• Fast transient Communication IEC 60255-22-4 Class II; 1kV

Mechanical compliance

• Vibration IEC 60255-21-1 Class 2
• Shock IEC 60255-21-2 Class 2
• Seismic IEC 60255-21-3 Class 2

Insulation

• Dielectric test IEC 60255-5, 2,0kV 1min
• Impuls voltage test IEC 60255 / EN 50178 5kV / 6kV
• Insulation resistance IEC 60255-5; > 100 Mohm at 500 VDC

Dimensions and Weight

• Height 44 mm (1u)
• Width 444 mm
• Depth 227 mm
• Weight 3 kg

The unit is intended to be mounted in a 19” rack.

 

Read more...

To contact Netopt about Fibersystem Fiber Optical Converter C37.94 – E1 G.703 SyncE use Get a quote.

Fibersystem substation products is built for demanding environments and can stand 4kV peaks. Adapters are available for other type of connections, e.g. BNC.

• IEEE C37.94 and E1 G.703 connection over Synchronous Ethernet
• Both channels are transparently converted into UDP packets and back
• Web interface monitor/management, enables:
  • Configuration/set-up
  • Event monitoring
  • Monitor alarm
  • Firmware upgrade
  • Filtering of unauthorized traffic
• New security functions:
  • Optional extra removable power supply for redundancy
  • Optional encryption of traffic
  • Tampering proof casing
• C37.94 and E1 channel is transparent to protocols and signalling – All data channels transferred
• Selectable clock synchronisation with SyncE network, E1 input, C37.94 input or a clock feed from a reference
• Low latency
• Standards compliant for power substation installation
• 19” rack mounting with only 227mm depth

 

TECHNICAL DATA

Fiber Optical C37.94 link

• Data speed 2048kbps
• Protocol IEEE C37.94
• Fiber Multi Mode 850nm 50/125um or 62.5/125um, LC-connector (ruggedized) Other fiber optical components available as option
• Optical system budget 13dB in 62.5/um. 9dB in 50/125um fiber
• Typical distance 0 – 2km (3dB system margin for 50/125um and 6dB for 62.5/125um)

Galvanic E1 link

• Data speed 2048kbps
• Protocol G.703, E1
• Connector 120 ohm, RJ45 (BNC connector available)

Galvanic Synchronous Ethernet link

• Data speed 1000 BaseT
• Protocol SyncE according to ITU-T (G.8261, G.8262, G.8264) standardized network with transference of clock signals over Ethernet physical layer
• Connector RJ45 cat 6
• Prerequisites Each network element along a synchronization path must support SyncE

Clock input/output

• Clock frequency out Selectable
• Clock frequency in Selectable
• Connector SMA

Power Supply

• DC 36-75VDC
• AC 85-264VAC, 50−60 Ηz or 120-370VDC.
• AC-connector IEC 320, 3pin, locking IEC

Environmental

• Operating temperature range 25 to +55°C
• Storage temperature range 40 to +85°C
• Relative humidity operating 5 to 95 %
• Relative humidity storage 5 to 95 % non-condensing

CE compliance

• Immunity EN 61000-6-2
• Emission EN 61000-6-4
• LVD EN 50178; RIV = 250 V OVC = III

EMC compliance

• ESD IEC 60255-22-2 Class 3, contact 6kV, air 8kV
• Radiated IEC 60255-22-3 / IEEE/ANSI C37.90.2; 35V/m
• Burst Power IEC 60255-22-1 Class III
• Burst Communication IEC 60255-22-1 Class II; 0,5 kV diff; 1 kV common mode
• Fast transient Power IEC 60255-22-4 Class IV
• Fast transient Communication IEC 60255-22-4 Class II; 1kV

Mechanical compliance

• Vibration IEC 60255-21-1 Class 2
• Shock IEC 60255-21-2 Class 2
• Seismic IEC 60255-21-3 Class 2

Insulation

• Dielectric test IEC 60255-5, 2,0kV 1min
• Impuls voltage test IEC 60255 / EN 50178 5kV / 6kV
• Insulation resistance IEC 60255-5; > 100 Mohm at 500 VDC

Dimensions and Weight

• Height 44 mm (1u)
• Width 444 mm
• Depth 227 mm
• Weight 3 kg

The unit is intended to be mounted in a 19” rack.

 

Read less...

To contact Netopt about Fibersystem Fiber Optical Converter C37.94 – E1 G.703 SyncE use Get a quote.