Continuous Run Vent Unloaders | Load Genie Get latest price

LGM20

LGM30

LGM40

Self-contained unloading valve

In Stock

Features of this product range

• Built-in head unloaders are NOT required on the compressor
• Contains all components required: pilot valve, vent valve, and a check valve
• Field Adjustable

LGM 20 - Mark II

• Minimum cut-out pressure is 60 PSI (415 kPa) / Maximum cut-out pressure is 250 PSI (1725 kPa)
• Construction: Forged brass body, brass and zinc-plated steel internal components, stainless steel springs, and glass filled fluropolymer poppets

LGM 30 - Mark III

• Minimum cut-out pressure is 250 PSI (1725 kPa)
• Construction: Forged brass body, zinc-plated steel internal components, flurocarbon piston ring, stainless steel springs, and glass filled fluropolymer check valve poppet
• Compact size
• Straight through flow design

LGM 40 - Mark IV

• Minimum cut-out pressure is 60 PSI (415 kPa) / Maximum cut-out pressure is 250 PSI (1725 kPa)
• Construction: Forged brass body, zinc-plated steel internal components, flurocarbon piston ring, stainless steel springs, and a glass filled fluropolymer check valve poppet
• Compact size
• Straight through or 90° flow design

To contact Ross Brown Sales about Continuous Run Vent Unloaders | Load Genie use Get a quote.

Features of this product range

• Built-in head unloaders are NOT required on the compressor
• Contains all components required: pilot valve, vent valve, and a check valve
• Field Adjustable

LGM 20 - Mark II

• Minimum cut-out pressure is 60 PSI (415 kPa) / Maximum cut-out pressure is 250 PSI (1725 kPa)
• Construction: Forged brass body, brass and zinc-plated steel internal components, stainless steel springs, and glass filled fluropolymer poppets

LGM 30 - Mark III

• Minimum cut-out pressure is 250 PSI (1725 kPa)
• Construction: Forged brass body, zinc-plated steel internal components, flurocarbon piston ring, stainless steel springs, and glass filled fluropolymer check valve poppet
• Compact size
• Straight through flow design

LGM 40 - Mark IV

• Minimum cut-out pressure is 60 PSI (415 kPa) / Maximum cut-out pressure is 250 PSI (1725 kPa)
• Construction: Forged brass body, zinc-plated steel internal components, flurocarbon piston ring, stainless steel springs, and a glass filled fluropolymer check valve poppet
• Compact size
• Straight through or 90° flow design

Read less...

To contact Ross Brown Sales about Continuous Run Vent Unloaders | Load Genie use Get a quote.

Mark IV Load Genie Datasheet(0.45MB)

Mark III Load Genie Datasheet(0.43MB)

Mark II Load Genie Datasheet(0.73MB)