Cembre - Crimper - 13T | B1300-CT Get latest price

Crimper - 13T | B1300-CT

In Stock

New Li-Ion 18V 4 Ah batteries offer a higher capacity than 14.4V 3 Ah, while greater crimping speed and crimping force result from a revitalised hydraulic system with double speed action: a more rapid approach of the dies to the connector then a more controlled, powerful speed for crimping. The crimping head can rotate through 180 degrees for ease of operation while a large 25mm jaw allows easier introduction/removal of compression terminations and joints. A maximum pressure sensor and security valve together assure greater precision and repeatability of the pressure cycle and double the provision for operator safety.

Product Features: 

• Greater crimping speed and force
• Maximum pressure sensor and security valve for greater precision and operator safety
• Bi-component plastic shell provides high resistance to wear and damage
• Rubber grip
• Low noise and minimal vibration for operator comfort
• LED lighting area for additional convenience and safety
• Crimping cycle data (up to 200,000 events) stored on memory card for transfer to PC by USB interface

Battery Features:

• Provides 100% of its energy between -15 deg C and 50 deg C
• Electronic control of single cells to avoid overcharging and undercharging
• Air-cooled charging technology to increase battery life
• Quickest charging time
• Auto-off to optimise energy consumption

Product Specifications: 

• Crimping Force: 132kN
• Dimensions:
• Length: 406mm
• Height: 239mm
• Width: 102.5mm
• Battery: Li-Ion 18V 4.0 Ah
• Weight (with battery): 6.5kg

The B1300-CT is supplied with:

• Battery and shoulder strap
• Spare battery
• Battery charger
• Plastic carrying case suitable for storing the tool and die sets

OLED Display

The OLED display provides essential real time tool operating information data including:

• Minimum set force and momentary force reached expressed in kN (confirms correct operation
• Minimum set force and momentary force reached expressed in US Ton (confirms correct operation)
• Minimum set pressure and momentary pressure reached expressed in bar (confirm correct operation)
• Minimum set pressure and momentary pressure reached expressed in Psi (confirm correct operation)
• Battery charge level
• No. of cycles performed and No. of cycles recommended before scheduled maintenance
• Cembre logo, tool model and tool serial No.
• LED Worklights (On and Off)
• Return to factory settings/firmware version

Read more...

To contact MSS Data Solutions about Cembre Crimper - 13T | B1300-CT use Get a quote.

New Li-Ion 18V 4 Ah batteries offer a higher capacity than 14.4V 3 Ah, while greater crimping speed and crimping force result from a revitalised hydraulic system with double speed action: a more rapid approach of the dies to the connector then a more controlled, powerful speed for crimping. The crimping head can rotate through 180 degrees for ease of operation while a large 25mm jaw allows easier introduction/removal of compression terminations and joints. A maximum pressure sensor and security valve together assure greater precision and repeatability of the pressure cycle and double the provision for operator safety.

Product Features: 

• Greater crimping speed and force
• Maximum pressure sensor and security valve for greater precision and operator safety
• Bi-component plastic shell provides high resistance to wear and damage
• Rubber grip
• Low noise and minimal vibration for operator comfort
• LED lighting area for additional convenience and safety
• Crimping cycle data (up to 200,000 events) stored on memory card for transfer to PC by USB interface

Battery Features:

• Provides 100% of its energy between -15 deg C and 50 deg C
• Electronic control of single cells to avoid overcharging and undercharging
• Air-cooled charging technology to increase battery life
• Quickest charging time
• Auto-off to optimise energy consumption

Product Specifications: 

• Crimping Force: 132kN
• Dimensions:
• Length: 406mm
• Height: 239mm
• Width: 102.5mm
• Battery: Li-Ion 18V 4.0 Ah
• Weight (with battery): 6.5kg

The B1300-CT is supplied with:

• Battery and shoulder strap
• Spare battery
• Battery charger
• Plastic carrying case suitable for storing the tool and die sets

OLED Display

The OLED display provides essential real time tool operating information data including:

• Minimum set force and momentary force reached expressed in kN (confirms correct operation
• Minimum set force and momentary force reached expressed in US Ton (confirms correct operation)
• Minimum set pressure and momentary pressure reached expressed in bar (confirm correct operation)
• Minimum set pressure and momentary pressure reached expressed in Psi (confirm correct operation)
• Battery charge level
• No. of cycles performed and No. of cycles recommended before scheduled maintenance
• Cembre logo, tool model and tool serial No.
• LED Worklights (On and Off)
• Return to factory settings/firmware version

Read less...

To contact MSS Data Solutions about Cembre Crimper - 13T | B1300-CT use Get a quote.