CEJN Filter Regulator Model 652

CEJN - Filter Regulator Model 652

Supplier: CEJN Australia

Filter Regulator Model 652

In Stock

Filter Regulator Model 652

High flow capacity at low pressure drop

Easy replacement of filter element

Provides constant output pressure

For optimal performance, Model 652 combines a filter, regulator and flat gauge in one product. The filter will remove any moisture or debris and the regulator provides a controlled and consistent air pressure. Thanks to its compact design, it is a good alternative in applications where space is limited. Model 652, piggyback, manages compressed air systems operating up to 16 bar (232 PSI) inlet pressure. The model features a polycarbonate bowl, easily visible level indicators, locking device and for extended lifetime, a flexible rolling diaphragm. Application: Virtually every industry, e.g. manufacturing, food, processing, carpentry, paper mills, etc., relies on compressed air as an energy source. In a shared compressed air network, with numerous outlets and an extensive pipework system, air preparation units are especially important.

For smaller and larger sizes refer to Model 651 and Model 653. Additional air treatment products are available in our air treatment range including preassembled units.

Technical Data

Media: Compressed air, neutral gas

Max. working pressure @ 23°C: 16 bar (232 PSI)

Temperature range: -20°C — +50°C (-4°F — +122°F)

Filtering element: Sintered polyethylene

Material body: Aluminium

Material bowl: Polycarbonate

Condensate drain: Semi-automatic

Controlled pressure: 0.5-10 bar (7-145 PSI)

Hysterisis: 0.3 bar (4 PSI)

Material seal: Nitrile

Flow capacity is measured at 6.3 bar (91.4 PSI) inlet pressure, and pressure drop at 1 bar (14.5 PSI).

Article Data

Part No. A B C D E F G H I K

19 503 5404 273 66 94.5 253.5 G 1/8" G 1/8" 73 69 30.5 G 3/8"

19 503 5414 273 66 94.5 253.5 G 1/8" G 1/8" 73 69 30.5 G 3/8"

19 503 5405 273 66 94.5 253.5 G 1/8" G 1/8" 73 69 30.5 G 1/2"

19 503 5415 273 66 94.5 253.5 G 1/8" G 1/8" 73 69 30.5 G 1/2"

Filter/Regulators Part No. Connection Bowl capacity Filtration Controlled pressure Max flow

19 503 5404 G 3/8" 11 cl 25 µm 0.5 - 10 bar (7-145 PSI) 5420 l/min (191.3 CFM)

19 503 5414 G 3/8" 11 cl 5 µm 0.5 - 10 bar (7-145 PSI) 4450 l/min (157.1 CFM)

19 503 5405 G 1/2" 11 cl 25 µm 0.5 - 10 bar (7-145 PSI) 5500 l/min (194.2 CFM)

19 503 5415 G 1/2" 11 cl 5 µm 0.5 - 10 bar (7-145 PSI) 4490 l/min (158.5 CFM)

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards.
Read more...

To contact CEJN Australia about CEJN Filter Regulator Model 652 use Get a quote.

Filter Regulator Model 652

High flow capacity at low pressure drop

Easy replacement of filter element

Provides constant output pressure

For optimal performance, Model 652 combines a filter, regulator and flat gauge in one product. The filter will remove any moisture or debris and the regulator provides a controlled and consistent air pressure. Thanks to its compact design, it is a good alternative in applications where space is limited. Model 652, piggyback, manages compressed air systems operating up to 16 bar (232 PSI) inlet pressure. The model features a polycarbonate bowl, easily visible level indicators, locking device and for extended lifetime, a flexible rolling diaphragm. Application: Virtually every industry, e.g. manufacturing, food, processing, carpentry, paper mills, etc., relies on compressed air as an energy source. In a shared compressed air network, with numerous outlets and an extensive pipework system, air preparation units are especially important.

For smaller and larger sizes refer to Model 651 and Model 653. Additional air treatment products are available in our air treatment range including preassembled units.

Technical Data

Media: Compressed air, neutral gas

Max. working pressure @ 23°C: 16 bar (232 PSI)

Temperature range: -20°C — +50°C (-4°F — +122°F)

Filtering element: Sintered polyethylene

Material body: Aluminium

Material bowl: Polycarbonate

Condensate drain: Semi-automatic

Controlled pressure: 0.5-10 bar (7-145 PSI)

Hysterisis: 0.3 bar (4 PSI)

Material seal: Nitrile

Flow capacity is measured at 6.3 bar (91.4 PSI) inlet pressure, and pressure drop at 1 bar (14.5 PSI).

Article Data

Part No. A B C D E F G H I K

19 503 5404 273 66 94.5 253.5 G 1/8" G 1/8" 73 69 30.5 G 3/8"

19 503 5414 273 66 94.5 253.5 G 1/8" G 1/8" 73 69 30.5 G 3/8"

19 503 5405 273 66 94.5 253.5 G 1/8" G 1/8" 73 69 30.5 G 1/2"

19 503 5415 273 66 94.5 253.5 G 1/8" G 1/8" 73 69 30.5 G 1/2"

Filter/Regulators Part No. Connection Bowl capacity Filtration Controlled pressure Max flow

19 503 5404 G 3/8" 11 cl 25 µm 0.5 - 10 bar (7-145 PSI) 5420 l/min (191.3 CFM)

19 503 5414 G 3/8" 11 cl 5 µm 0.5 - 10 bar (7-145 PSI) 4450 l/min (157.1 CFM)

19 503 5405 G 1/2" 11 cl 25 µm 0.5 - 10 bar (7-145 PSI) 5500 l/min (194.2 CFM)

19 503 5415 G 1/2" 11 cl 5 µm 0.5 - 10 bar (7-145 PSI) 4490 l/min (158.5 CFM)

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards.

Read less...

To contact CEJN Australia about CEJN Filter Regulator Model 652 use Get a quote.