Budenberg - Pneumatic Deadweight Testers | BGP1P

Pneumatic Deadweight Testers | BGP1P

BGP1P Pneumatic Deadweight Tester's ergonomic carry case contains the piston cylinder unit, mass set, pump, indicating gauge and connection hose - everything needed to carry out on-site, high-accuracy pressure calibrations.

The BGP1P has a 1/2in^₂ high chrome steel piston/cylinder unit.The design has been proven over many years to provide excellent sensitivity and stability. Low start pressure is achieved through use of a hollow piston and aluminium head.

NOTE: Model BGP1P can be used on vacuum with a model 24 adaptor for negative gauge pressure calibrations.

Budenberg's Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.

Standard accuracy without any corrections for actual area is 0.02% from 100 to 1000 mbar, 0.04% from 15 to 100 mbar. Higher accuracy Class A testers are available (supplied with UKAS Calibration certificates for area and mass) allowing an accuracy of 0.006% to be achieved.

• Ranges from 15 to 1000 mbar / 1.5 to 100 kPa
• Supplied with integral pressure generation

BGP120 by Budenberg Features

• Range: From 15 to 1000 mbar / 1.5 to 100 kPa
• Standard Accuracy: To 0.015%
• Class ‘A’ Accuracy: To 0.006%
• Accessories: Two gauge stand, carry cases,
• Piston/Cylinder Unit: 1/2in² high chrome steel
• Weights: Austenitic stainless steel

Read more...

To contact Procon Instrument Technology about Budenberg Pneumatic Deadweight Testers | BGP1P use Get a quote.

BGP1P Pneumatic Deadweight Tester's ergonomic carry case contains the piston cylinder unit, mass set, pump, indicating gauge and connection hose - everything needed to carry out on-site, high-accuracy pressure calibrations.

The BGP1P has a 1/2in^₂ high chrome steel piston/cylinder unit.The design has been proven over many years to provide excellent sensitivity and stability. Low start pressure is achieved through use of a hollow piston and aluminium head.

NOTE: Model BGP1P can be used on vacuum with a model 24 adaptor for negative gauge pressure calibrations.

Budenberg's Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.

Standard accuracy without any corrections for actual area is 0.02% from 100 to 1000 mbar, 0.04% from 15 to 100 mbar. Higher accuracy Class A testers are available (supplied with UKAS Calibration certificates for area and mass) allowing an accuracy of 0.006% to be achieved.

• Ranges from 15 to 1000 mbar / 1.5 to 100 kPa
• Supplied with integral pressure generation

BGP120 by Budenberg Features

• Range: From 15 to 1000 mbar / 1.5 to 100 kPa
• Standard Accuracy: To 0.015%
• Class ‘A’ Accuracy: To 0.006%
• Accessories: Two gauge stand, carry cases,
• Piston/Cylinder Unit: 1/2in² high chrome steel
• Weights: Austenitic stainless steel

Read less...

To contact Procon Instrument Technology about Budenberg Pneumatic Deadweight Testers | BGP1P use Get a quote.

For more information on the BGP1P Dead Weight Tester(0.18MB)

For more information on optional accessories(0.31MB)