Amiad Screen Filter | Sigma Pro 6000 C/W ...

Amiad - Screen Filter | Sigma Pro 6000 C/W ADI-P DC Control Price Guide: $10,588

Supplier: Land and Water Technology

Screen Filter | Sigma Pro 6000 C/W ADI-P DC Control

Amiad Sigma 6000 Multi-Screen Automatic Filters

Video for Amiad Screen Filter | Sigma Pro 6000 C/W ADI-P DC Control

In Stock

100mm Flanged Sigma 6000 80 Micron Incl. Rinse Control

Multi-screen polymeric, self-cleaning filter combining Amiad’s suction-scanning screen technology with an innovative compact design, a single hydraulic turbine and a smart gear.

*Other Micron Varients available upon request

Large filtration area
High flow rates per area
Corrosion- and fertilizer-resistant (pH > 5) polymeric housing
Suction-scanning screen technology
Automated and efficient self-cleaning
Low water and energy consumption
Innovative compact design and small footprint
Easy installation and maintenance
Diverse open-field irrigation, landscaping, greenhouse and aquaculture applications
AC/DC electronic controller (optional)

How the Sigma Filter Works

General
The Amiad “Sigma” filter is an automatic filter, with multiple screens operated by a single hydraulic turbine mechanism.
With a capacity up to 120 m3/h (528 gpm) and from 80-300 micron filtration degree. Inlet/Outlet connections are
100 mm (4”) diameter, and exhaust valve is 50 mm (2”).

The Filtration
Raw water enters from the filter inlet and passes through the multi-screens. Clean water flows through the filter
outlet. The gradual dirt buildup on the inner screen surface causes a filter cake to develop, with a corresponding
increase in the pressure differential across the multi-screens. A pressure differential switch (hydraulic or electric)
senses the pressure differential and when it reaches a pre-set value, the self-cleaning process begins.

The Control System
The “Sigma” operation and cleaning cycle is controlled and monitored by a hydraulic rinse control, or an electronic
battery /AC controller.
During the self-cleaning cycle the rinse control operates the exhaust valve by means of an hydraulic command, and
when the cycle is complete, it automatically closes the exhaust valve and waits for the next cycle. In the case of the
electronic controller, the self-cleaning cycle is triggered by the DP switch, then the AC or DC controller switches the
solenoid to open or close the exhaust valve by means of a hydraulic command, when cycle is complete, the controller
will shut the exhaust valve and wait for another cleaning command.

The self-cleaning cycle begins under any one of the following conditions:

Receiving a signal from the Pressure Differential Device - which is preset at 0.5 bar.
Time interval parameter set at the controller (electronic controller only).
Manual Start, triggered by 3 way ball valve or via electronic controller keypad.

The electronic controller also provides:

Flush cycles counter
Alerts output – low battery, DP cycle

To contact Land and Water Technology about Amiad Screen Filter | Sigma Pro 6000 C/W ADI-P DC Control use Get a quote.