Adkins - Heat Press | The Adkins Studio 38 Clam

Heat Press | The Adkins Studio 38 Clam

The Adkins Studio 38 Clam

• A Reliable Tried & Tested Manual Press
• Easy to Use, with all necessary Temperature & Time Regulation being controlled Digitally for Accuracy.
• Pressure Regulation is Easily Performed via a Comfortably sized Hand Wheel.

The Studio 38 is a very Portable Press for Markets, Shows etc, and Large enough to Accommodate most Pressing Applications

The Heat Plate Area is 38 x 38cm and has a Teflon Coated Surface for Clean Release of Transfers etc. It also comes with quality silicone rubber base pads are used to provide excellent transfer results every time.

The 38’s Base has Good Clearance which Enables Youth and Adult T-shirts to be Fitted over that Base.

The Base is Attached via 2 Bolts, so Optional Bases can be Fitted.

The Studio 38’s Heat Plate lifts well Clear of the Base giving the Operator plenty of space to load and unload – a characteristic not shown by the brochure photograph.

Features of the Studio Clam

• Self adhesive silicone base pad.
• Fingertip pressure control.
• Manufactured and tested to comply with EC safety regulations. CE labelled.
• 12 month warranty on machine.
• Full service/ spares support.
• Manual supplied illustrates electrical wiring diagrams, exploded diagram and parts list. Full safety instructions.
• Thermal cut out on the heating element shuts off power to the elements if the temperature exceeds 260ºC +/- 15ºC (500ºF +/- 27ºF)

Specifications

• Maximum working temperature 260°C
• Display timer range 0 – 9999 sec
• 38 cm 61 cm 34 kg 76(L) x 48.5(W) x 41 cm(H)
• Power supply: Single Phase 10 AMPs
• Machine height closed 34.5 cm
• Machine height open 86 cm
• Machine width: 38cm
• Machine Depth: 61cm
• Press pad dimensions: 38 x 38cm

Read more...

To contact Leapfrog Machinery about Adkins Heat Press | The Adkins Studio 38 Clam use Get a quote.

The Adkins Studio 38 Clam

• A Reliable Tried & Tested Manual Press
• Easy to Use, with all necessary Temperature & Time Regulation being controlled Digitally for Accuracy.
• Pressure Regulation is Easily Performed via a Comfortably sized Hand Wheel.

The Studio 38 is a very Portable Press for Markets, Shows etc, and Large enough to Accommodate most Pressing Applications

The Heat Plate Area is 38 x 38cm and has a Teflon Coated Surface for Clean Release of Transfers etc. It also comes with quality silicone rubber base pads are used to provide excellent transfer results every time.

The 38’s Base has Good Clearance which Enables Youth and Adult T-shirts to be Fitted over that Base.

The Base is Attached via 2 Bolts, so Optional Bases can be Fitted.

The Studio 38’s Heat Plate lifts well Clear of the Base giving the Operator plenty of space to load and unload – a characteristic not shown by the brochure photograph.

Features of the Studio Clam

• Self adhesive silicone base pad.
• Fingertip pressure control.
• Manufactured and tested to comply with EC safety regulations. CE labelled.
• 12 month warranty on machine.
• Full service/ spares support.
• Manual supplied illustrates electrical wiring diagrams, exploded diagram and parts list. Full safety instructions.
• Thermal cut out on the heating element shuts off power to the elements if the temperature exceeds 260ºC +/- 15ºC (500ºF +/- 27ºF)

Specifications

• Maximum working temperature 260°C
• Display timer range 0 – 9999 sec
• 38 cm 61 cm 34 kg 76(L) x 48.5(W) x 41 cm(H)
• Power supply: Single Phase 10 AMPs
• Machine height closed 34.5 cm
• Machine height open 86 cm
• Machine width: 38cm
• Machine Depth: 61cm
• Press pad dimensions: 38 x 38cm

Read less...

To contact Leapfrog Machinery about Adkins Heat Press | The Adkins Studio 38 Clam use Get a quote.