Vacuum Former 242

Vacuum Former 242

Vacuum Former 242

The maximum mould height is 300mm (12”).

The heater hood contains ceramic elements grouped into 15 zones controlled by a PLC. During the heating cycle pressure balancing maintains sheet level, ensuring consistent heating over the whole area.

The PLC controls the heater zones, the movement of the heater hood, platen and clamp frame, and the vacuum/blow cycles. Heat settings are adjusted in 1% increments and heating/vacuum /blow cycles are controlled in 0.1 second increments. Up to 40 heater and timer sequence settings can be stored in the PLC memory.

Part cooling is provided by a centrifugal fan mounted above the forming area and controlled by the PLC.

The machine is fitted with light curtain guarding, complying with current European legislation. Each unit comes with a 12 month warranty.

Features:

• 686 x 660mm sheet size
• 647 x 622mm forming aperture
• 15 zone ceramic heater system
• 320 mm platen stroke
• 300 mm maximum mould height
• 6 mm maximum sheet thickness
• Integral sheet cooling system
• PLC controlled heating, vacuum & blow cycles
• Up to 40 heating & 40 timing cycles stored in the PLC memory
• Pressure balancing ensures even heating
• Pneumatically operated heater hood, platen and clamp frame
• -0.83 bar (25 in Hg) vacuum (typical)
• Moulded RTV silicone, heat proof clamp frame seal
• Mounted on castors for mobility

 

Read more...

To contact CR Clarke about Vacuum Former 242 use Get A Quote.

Vacuum Former 242

The maximum mould height is 300mm (12”).

The heater hood contains ceramic elements grouped into 15 zones controlled by a PLC. During the heating cycle pressure balancing maintains sheet level, ensuring consistent heating over the whole area.

The PLC controls the heater zones, the movement of the heater hood, platen and clamp frame, and the vacuum/blow cycles. Heat settings are adjusted in 1% increments and heating/vacuum /blow cycles are controlled in 0.1 second increments. Up to 40 heater and timer sequence settings can be stored in the PLC memory.

Part cooling is provided by a centrifugal fan mounted above the forming area and controlled by the PLC.

The machine is fitted with light curtain guarding, complying with current European legislation. Each unit comes with a 12 month warranty.

Features:

• 686 x 660mm sheet size
• 647 x 622mm forming aperture
• 15 zone ceramic heater system
• 320 mm platen stroke
• 300 mm maximum mould height
• 6 mm maximum sheet thickness
• Integral sheet cooling system
• PLC controlled heating, vacuum & blow cycles
• Up to 40 heating & 40 timing cycles stored in the PLC memory
• Pressure balancing ensures even heating
• Pneumatically operated heater hood, platen and clamp frame
• -0.83 bar (25 in Hg) vacuum (typical)
• Moulded RTV silicone, heat proof clamp frame seal
• Mounted on castors for mobility

 

Read less...

To contact CR Clarke about Vacuum Former 242 use Get A Quote.