Tank Blanketing Valve | Valve Concepts Model 1078

Tank Blanketing Valve | Valve Concepts Model 1078

Tank Blanketing Valve | Valve Concepts Model 1078

The Model 1078 is a pilot-operated valve, specifically designed to reduce blanketing gas losses on lowpressure storage tanks. It opens and closes automatically as required, to maintain a closely controlled blanket pressure. The simple design, increases reliability and lowers maintenance cost.

The Vacu-Gard® makes the job much easier. First, the Vacu-Gard® set point definition is where the blanketing valve closes bubble tight. This gives the largest dead band between the blanketing valve set point and the set point of the relieving device, and therefore will reduce losses. Second, the Vacu-Gard® has a wide range of available settings, from vacuum to 14 psig, that make proper selection easier.

Features

• Single valve system offers wide variety of configurations to meet every blanketing application. Self cleaning flow design.
  
  
• Compact and light weight yet allows complete access to the valve internals without being removed from the tank. Only time the diaphragm case needs to be disassembled is when replacing the diaphragm.
  
  
• Pressure balanced pilot. Fluctuations in supply pressure does not affect set point.
  
  
• Bubble tight at set point, prevents waste of blanketing gases. Uses standard o-rings for seat and seals.
  
  
• Uses standard o-rings for seat and seals.

To contact Pressure and Safety Systems about Tank Blanketing Valve | Valve Concepts Model 1078 use Get A Quote.

The Model 1078 is a pilot-operated valve, specifically designed to reduce blanketing gas losses on lowpressure storage tanks. It opens and closes automatically as required, to maintain a closely controlled blanket pressure. The simple design, increases reliability and lowers maintenance cost.

The Vacu-Gard® makes the job much easier. First, the Vacu-Gard® set point definition is where the blanketing valve closes bubble tight. This gives the largest dead band between the blanketing valve set point and the set point of the relieving device, and therefore will reduce losses. Second, the Vacu-Gard® has a wide range of available settings, from vacuum to 14 psig, that make proper selection easier.

Features

• Single valve system offers wide variety of configurations to meet every blanketing application. Self cleaning flow design.
  
  
• Compact and light weight yet allows complete access to the valve internals without being removed from the tank. Only time the diaphragm case needs to be disassembled is when replacing the diaphragm.
  
  
• Pressure balanced pilot. Fluctuations in supply pressure does not affect set point.
  
  
• Bubble tight at set point, prevents waste of blanketing gases. Uses standard o-rings for seat and seals.
  
  
• Uses standard o-rings for seat and seals.

Read less...

To contact Pressure and Safety Systems about Tank Blanketing Valve | Valve Concepts Model 1078 use Get A Quote.