Spill Protection | Track Matting

Spill Protection | Track Matting

Track Matting (Spill Protection) is Australian made and designed to provide sorbency and spill protection in rail-specific applications. This three level matting is made up of sorbent needle-punched material which is top layered with a UV mesh for added strength and then poly-backed with a chemical resistant material to keep unwanted fluids from getting into the ballast and leaching into our waterways.

 

Construction of Track Matting: 

• Top layer – mesh UV protection layer
• Second layer – hydrocarbon absorbent layer
• Third layer – industrial grade PVC sealant layer

Roll Sizes for Track Matting:   

• Length - 25 metre lengths to facilitate OH&S friendly handling
• Widths – 1.5 metre for between tracks, 0.5 metre for outer track leaks

Installation of Track Matting:   

• Simply roll out between tracks (and outer edges if required) – secure by nailing to sleepers or weighting with ballast.

Advantages of Track Matting: 

• Increased service life (typically twice that of single layer matting)
• Cost savings through lower replacement intervals
• Positive protection of the ballast through PVC sealing layer and rolled edges preventing edge overflow of spills
• User friendly roll sizes (25m lengths)

Read more...

To contact Bulbeck Enviro about Spill Protection | Track Matting use Get A Quote.

Track Matting (Spill Protection) is Australian made and designed to provide sorbency and spill protection in rail-specific applications. This three level matting is made up of sorbent needle-punched material which is top layered with a UV mesh for added strength and then poly-backed with a chemical resistant material to keep unwanted fluids from getting into the ballast and leaching into our waterways.

 

Construction of Track Matting: 

• Top layer – mesh UV protection layer
• Second layer – hydrocarbon absorbent layer
• Third layer – industrial grade PVC sealant layer

Roll Sizes for Track Matting:   

• Length - 25 metre lengths to facilitate OH&S friendly handling
• Widths – 1.5 metre for between tracks, 0.5 metre for outer track leaks

Installation of Track Matting:   

• Simply roll out between tracks (and outer edges if required) – secure by nailing to sleepers or weighting with ballast.

Advantages of Track Matting: 

• Increased service life (typically twice that of single layer matting)
• Cost savings through lower replacement intervals
• Positive protection of the ballast through PVC sealing layer and rolled edges preventing edge overflow of spills
• User friendly roll sizes (25m lengths)

Read less...

To contact Bulbeck Enviro about Spill Protection | Track Matting use Get A Quote.