Sense IoT - Serial Modbus Gateway

Serial Modbus Gateway

This device allows you to connect up to 50 wireless sensing devices, per gateway, to your existing serial Modbus RS-232C and RS-485 sensing and control infrastructures. Sense IoT has recognized the importance of using open standards like Modbus, allowing Sense IoT wireless sensors to be used in the majority of industrial applications. Modbus is often used to connect a supervisory computer with a remote terminal unit (RTU) in supervisory control and data acquisition (SCADA) systems. Modbus allows for communication between many (approximately 247) devices connected to the same wired network. Therefore, Sense IoT's Serial Modbus Gateway allows for seemingly unlimited wireless expansion to a traditional wired network. A system incorporating a Sense IoT SMG would consists of the following: • Modbus Master – PLC, SCADA, etc. • Existing RS-232C or RS-485 Infrastructure • Serial Modbus Gateway (SMG) • Wireless Sensors

Serial Modbus Gateway Specifications

• Product Code: MNG2-4-SG-SMG
• Antenna: Connector: RP-SMA Gain 5.0 (dBi) Standard
• Protocols Supported: Jumper for RS-232 and RS485
• Input Power: 4.5 - 36 VDC
• LED Lights: Wireless Activity, Wired Activity, System Status
• Enclosure Material: Durable, Impact-Resistant UV Stabilized Polycarbonate (IP65 of IEC 529 and NEMA 1, 2, 4, 4x, 12 and 13 Rated)
• Dimensions: 179.6mm x 90.6mm x 41.3mm
• Weight: 453.5g

433 MHz Specifications

• Operating Frequency: 433 MHz Operating Frequency
• Certifications: CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
• Device Range: Device range up to 365.7m non-line-of-sight, wireless device range*
• Security: Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)

 

Read more...

To contact Sense IoT about Sense IoT Serial Modbus Gateway use Get a quote.

This device allows you to connect up to 50 wireless sensing devices, per gateway, to your existing serial Modbus RS-232C and RS-485 sensing and control infrastructures. Sense IoT has recognized the importance of using open standards like Modbus, allowing Sense IoT wireless sensors to be used in the majority of industrial applications. Modbus is often used to connect a supervisory computer with a remote terminal unit (RTU) in supervisory control and data acquisition (SCADA) systems. Modbus allows for communication between many (approximately 247) devices connected to the same wired network. Therefore, Sense IoT's Serial Modbus Gateway allows for seemingly unlimited wireless expansion to a traditional wired network. A system incorporating a Sense IoT SMG would consists of the following: • Modbus Master – PLC, SCADA, etc. • Existing RS-232C or RS-485 Infrastructure • Serial Modbus Gateway (SMG) • Wireless Sensors

Serial Modbus Gateway Specifications

• Product Code: MNG2-4-SG-SMG
• Antenna: Connector: RP-SMA Gain 5.0 (dBi) Standard
• Protocols Supported: Jumper for RS-232 and RS485
• Input Power: 4.5 - 36 VDC
• LED Lights: Wireless Activity, Wired Activity, System Status
• Enclosure Material: Durable, Impact-Resistant UV Stabilized Polycarbonate (IP65 of IEC 529 and NEMA 1, 2, 4, 4x, 12 and 13 Rated)
• Dimensions: 179.6mm x 90.6mm x 41.3mm
• Weight: 453.5g

433 MHz Specifications

• Operating Frequency: 433 MHz Operating Frequency
• Certifications: CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
• Device Range: Device range up to 365.7m non-line-of-sight, wireless device range*
• Security: Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)

 

Read less...

To contact Sense IoT about Sense IoT Serial Modbus Gateway use Get a quote.