RS PRO - Hydraulic Crimp Tool, 25-185sq.mm Price Guide: $1,297 Get latest price

Hydraulic Crimp Tool, 25-185sq.mm

Hydraulic Crimp Tool, 25-185sq.mm

Hydraulic Crimp Tool, 25-185sq.mm

Hydraulic Crimp Tool, 25-185sq.mm

Hydraulic Crimp Tool, 25-185sq.mm

Hydraulic Crimp Tool, 25-185sq.mm

In Stock

Hydraulic Crimper

This robust hydraulic crimping tool is compact and ideal for working in confined spaces. Having the benefit of spring loaded handles, the dies can be advanced using only one hand, therefore leaving the other hand free to position the connector. All models are highly reliable and excellent quality.

Features and Benefits:

• 180° rotational head
• Supplied with Die Sets
• Built-in safety valve
• Pressure release lever
• Housed in a moulded plastic carry case
• Comprehensive instructions included
• Cable Range: 25-185mm
• Crimping Force: 50kN
• Rated Operating Pressure: 600 bar (8600 psi)

What do you get?

• RS Pro Hydraulic Crimp Tool
• Die Set: 6 mm², 10 mm², 16 mm², 25 mm², 35 mm², 50 mm², 70 mm², 95 mm², 120 mm², 150 mm² and 185 mm²
• Plastic Case

 

Typical Applications

• Maintenance and repair
• Electrical Installations
• Cable assemblies

How easy are they to use?

Although this kit may look intimidating at first glance, it’s fairly simple to use. During application prepare the cable and slide on the connector, select and insert the required die, insert the cable and connector. Holding the cable in position with one hand, prime the handle until the crimp tool starts to bite, once you feel resistance you can use both hands to increase the pressure and complete the union.

How do you maintain the product?

• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

 

Specifications

Attribute	Value
Crimp Tool Type	Crimping Tool
Operation	Hydraulic
Crimp Connector Type	Tubular Cable Lug
Overall Length	386 mm

Read more...

To contact RS Components about RS PRO Hydraulic Crimp Tool, 25-185sq.mm use Get a quote.

Hydraulic Crimper

This robust hydraulic crimping tool is compact and ideal for working in confined spaces. Having the benefit of spring loaded handles, the dies can be advanced using only one hand, therefore leaving the other hand free to position the connector. All models are highly reliable and excellent quality.

Features and Benefits:

• 180° rotational head
• Supplied with Die Sets
• Built-in safety valve
• Pressure release lever
• Housed in a moulded plastic carry case
• Comprehensive instructions included
• Cable Range: 25-185mm
• Crimping Force: 50kN
• Rated Operating Pressure: 600 bar (8600 psi)

What do you get?

• RS Pro Hydraulic Crimp Tool
• Die Set: 6 mm², 10 mm², 16 mm², 25 mm², 35 mm², 50 mm², 70 mm², 95 mm², 120 mm², 150 mm² and 185 mm²
• Plastic Case

 

Typical Applications

• Maintenance and repair
• Electrical Installations
• Cable assemblies

How easy are they to use?

Although this kit may look intimidating at first glance, it’s fairly simple to use. During application prepare the cable and slide on the connector, select and insert the required die, insert the cable and connector. Holding the cable in position with one hand, prime the handle until the crimp tool starts to bite, once you feel resistance you can use both hands to increase the pressure and complete the union.

How do you maintain the product?

• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

 

Specifications

Attribute	Value
Crimp Tool Type	Crimping Tool
Operation	Hydraulic
Crimp Connector Type	Tubular Cable Lug
Overall Length	386 mm

Read less...

To contact RS Components about RS PRO Hydraulic Crimp Tool, 25-185sq.mm use Get a quote.

Hydraulic Crimp Tool, 25-185sq.mm Dimensions(0.14MB)

Hydraulic Crimp Tool, 25-185sq.mm(0.36MB)