Reo Mech - Electric 4‑20mm Rebar Cutter | ERCP-20

Electric 4‑20mm Rebar Cutter | ERCP-20

Features

• Superior quality & performance
• Lightening quick cut – under 2.5 seconds
• Industrial strength machine head
• 220-240V electric motor (110 120V available)
• Superior quality hydraulics
• Lightweight, portable model with detachable handle
• Increase efficiency and safety on site

Specifications

• This is a rebar cutter that can handle the toughest environments. With a cut diameter range of 4-20mm (500MPa), this machine can take on any challenge you might throw its way.
• The machine runs on a powerful yet reliable REO-MECH ERCP-20 Single Phase – 220-240V AC – 50Hz electric Motor meant to make your rebar cutting tasks a breeze.
• Using this machine won’t impact your energy efficiency targets – it only requires a power Input of 950W.
• The best part about this electric hydraulic rebar cutter is its unbelievable cutting speed. The machine packs a massive punch and can snip a 20mm steel rebar in less than 2.5 seconds!
• The total weight of this tool is just 13kgs – easy enough for your handymen to carry around and use without sustaining too much strain on their muscles and joints.
• The rebar cutter is designed for portability and easy manoeuvring. With its frame measuring about 50cm X 13cm X 14cm, you can conveniently use and store this machine without facing any hassles whatsoever.
• The product comes packed with a host of different accessories too. With this purchase, you get a Carry Case, Maintenance Kit & Safety Guard – no more worries about using and storing your rebar cutter!

Benefits

• First and foremost, you get the backing of REO-MECH, a brand known for its Superior quality & high in performance products that are a favourite of the construction industry.
• Rebar cutting, being a regular feature on construction sites, cannot be a time-consuming process. Thankfully, this hydraulic rebar cutter can make lightening quick cut, slicing through 20mm steel rods in under 2.5 seconds
• The machine comes packed with an industrial strength machine head that can take all the heavy duty use you might subject it to.
• Rapid Tool offers the REO-MECH ERCP-20 in two variants – with a 220-240V electric motor and with a 110-120V. You can choose either one of these, depending upon your power source requirements.
• The machine uses superior quality hydraulics and systems to deliver precise cuts with efficiency and finesse. This is a rebar cutter that will add to the professionalism of your construction team.
• The best and most prominent feature of the REO-MECH ERCP-20 is its portability. Made to provide easy manoeuvrability, its design is light weight, portable, offers easy operation and comes with a detachable handle as well.
• The no-flames, no-sparks cutting action of the rebar cutter will go a long way towards increasing the efficiency and safety of your construction site

 

Model	ERCP-20
Cut Diameter	4?20mm – 650N/mm2
Electric Motor	Single Phase – 220-240V AC – 50Hz
Power Input	950W
Cut Speed	< 2.5 sec
Net Weight	13kg
Dimensions	50cm X 13cm X 14cm
Accessories	Carry Case, Maintenance Kit & Safety Guard

Read more...

To contact Grano Direct about Reo Mech Electric 4‑20mm Rebar Cutter | ERCP-20 use Get a quote.

Features

• Superior quality & performance
• Lightening quick cut – under 2.5 seconds
• Industrial strength machine head
• 220-240V electric motor (110 120V available)
• Superior quality hydraulics
• Lightweight, portable model with detachable handle
• Increase efficiency and safety on site

Specifications

• This is a rebar cutter that can handle the toughest environments. With a cut diameter range of 4-20mm (500MPa), this machine can take on any challenge you might throw its way.
• The machine runs on a powerful yet reliable REO-MECH ERCP-20 Single Phase – 220-240V AC – 50Hz electric Motor meant to make your rebar cutting tasks a breeze.
• Using this machine won’t impact your energy efficiency targets – it only requires a power Input of 950W.
• The best part about this electric hydraulic rebar cutter is its unbelievable cutting speed. The machine packs a massive punch and can snip a 20mm steel rebar in less than 2.5 seconds!
• The total weight of this tool is just 13kgs – easy enough for your handymen to carry around and use without sustaining too much strain on their muscles and joints.
• The rebar cutter is designed for portability and easy manoeuvring. With its frame measuring about 50cm X 13cm X 14cm, you can conveniently use and store this machine without facing any hassles whatsoever.
• The product comes packed with a host of different accessories too. With this purchase, you get a Carry Case, Maintenance Kit & Safety Guard – no more worries about using and storing your rebar cutter!

Benefits

• First and foremost, you get the backing of REO-MECH, a brand known for its Superior quality & high in performance products that are a favourite of the construction industry.
• Rebar cutting, being a regular feature on construction sites, cannot be a time-consuming process. Thankfully, this hydraulic rebar cutter can make lightening quick cut, slicing through 20mm steel rods in under 2.5 seconds
• The machine comes packed with an industrial strength machine head that can take all the heavy duty use you might subject it to.
• Rapid Tool offers the REO-MECH ERCP-20 in two variants – with a 220-240V electric motor and with a 110-120V. You can choose either one of these, depending upon your power source requirements.
• The machine uses superior quality hydraulics and systems to deliver precise cuts with efficiency and finesse. This is a rebar cutter that will add to the professionalism of your construction team.
• The best and most prominent feature of the REO-MECH ERCP-20 is its portability. Made to provide easy manoeuvrability, its design is light weight, portable, offers easy operation and comes with a detachable handle as well.
• The no-flames, no-sparks cutting action of the rebar cutter will go a long way towards increasing the efficiency and safety of your construction site

 

Model	ERCP-20
Cut Diameter	4?20mm – 650N/mm2
Electric Motor	Single Phase – 220-240V AC – 50Hz
Power Input	950W
Cut Speed	< 2.5 sec
Net Weight	13kg
Dimensions	50cm X 13cm X 14cm
Accessories	Carry Case, Maintenance Kit & Safety Guard

Read less...

To contact Grano Direct about Reo Mech Electric 4‑20mm Rebar Cutter | ERCP-20 use Get a quote.