Phoenix - Dehumidifier | D850 - Portable

Dehumidifier | D850 - Portable

It combines the wide operating range and ultra-low grains of all of the Phoenix desiccants with the portability of an LGR like our Phoenix 250 Max. The included remote humidistat and process blower speed control allow you to tailor the drying to the task at hand.

D850 Features

• Variable speed blower gives you the ability to go for maximum grain depression or maximum water removal. You can use the maximum grain depression when tenting off dense materials.
• Operates both vertically or horizontally and is perfect for low clearance applications, fitting inside most crawlspaces.
• The lower carrying handle makes moving the unit down stairs, as well as into and out of a crawlspace, a breeze. 
• Delivers up to 850 CFM of ultra-low grain process air and removes a stunning 175 liters per day at AHAM conditions.
• The true four-hole design* allows for positive, neutral, or negative pressurization of the affected area.
• Three-hole desiccants** inherently pull unaffected and/or outside air into the drying chamber.

D850 Specifications

• Part Numbers : 4034000
• Power : 208-240 VAC, 50/60 Hz, Single Phase, 30A or 50A Branch Circuit Protection, (24A or 40A Actual Amp Draw)
• Water Removal : 370 PPD (175 LPD) at 80°F/60% RH (AHAM)
• CFM : 850 CFM Process Airflow, 225 CFM Reactivation Airflow (188 CFM 50Hz)
• Filter : Pleated 20” x 20” x 2” Media MERV 11 (Process), Pleated 9” x 11 3/8” x 13/4” Media MERV 11
• Ducting Options
  • Process Inlet: 18” or 12” Flex-Duct (Optional)
  • Process Outlet: 10” Lay-Flat Collar (Optional)
  • Reactivation Inlet: 6” Flex-Duct (Optional)
  • Reactivation Outlet: 6” Flex-Duct (Required)
• Cord Length : 2 Each 8’ Power Cords (1 Dryer, 1 Range)
• Unit Dimensions
  • Width: 20” (51 cm)
  • Height: 41” (104 cm)
  • Depth: 23.25” (66 cm)
  • Weight: 105 lbs (70.30kg)
• Operating Range : -10°F to 120°F
• Xactimate Code : WTRDHMD>

Read more...

To contact Restoration Express about Phoenix Dehumidifier | D850 - Portable use Get A Quote.

It combines the wide operating range and ultra-low grains of all of the Phoenix desiccants with the portability of an LGR like our Phoenix 250 Max. The included remote humidistat and process blower speed control allow you to tailor the drying to the task at hand.

D850 Features

• Variable speed blower gives you the ability to go for maximum grain depression or maximum water removal. You can use the maximum grain depression when tenting off dense materials.
• Operates both vertically or horizontally and is perfect for low clearance applications, fitting inside most crawlspaces.
• The lower carrying handle makes moving the unit down stairs, as well as into and out of a crawlspace, a breeze. 
• Delivers up to 850 CFM of ultra-low grain process air and removes a stunning 175 liters per day at AHAM conditions.
• The true four-hole design* allows for positive, neutral, or negative pressurization of the affected area.
• Three-hole desiccants** inherently pull unaffected and/or outside air into the drying chamber.

D850 Specifications

• Part Numbers : 4034000
• Power : 208-240 VAC, 50/60 Hz, Single Phase, 30A or 50A Branch Circuit Protection, (24A or 40A Actual Amp Draw)
• Water Removal : 370 PPD (175 LPD) at 80°F/60% RH (AHAM)
• CFM : 850 CFM Process Airflow, 225 CFM Reactivation Airflow (188 CFM 50Hz)
• Filter : Pleated 20” x 20” x 2” Media MERV 11 (Process), Pleated 9” x 11 3/8” x 13/4” Media MERV 11
• Ducting Options
  • Process Inlet: 18” or 12” Flex-Duct (Optional)
  • Process Outlet: 10” Lay-Flat Collar (Optional)
  • Reactivation Inlet: 6” Flex-Duct (Optional)
  • Reactivation Outlet: 6” Flex-Duct (Required)
• Cord Length : 2 Each 8’ Power Cords (1 Dryer, 1 Range)
• Unit Dimensions
  • Width: 20” (51 cm)
  • Height: 41” (104 cm)
  • Depth: 23.25” (66 cm)
  • Weight: 105 lbs (70.30kg)
• Operating Range : -10°F to 120°F
• Xactimate Code : WTRDHMD>

Read less...

To contact Restoration Express about Phoenix Dehumidifier | D850 - Portable use Get A Quote.